Arabesk 3 burning Question

[vdoeddy]

All of a sudden, my Arabesk 3 will only burn up to 1-hour of video. I always have gotten at least 2-hours in the past. I only have the one project I'm working with that is about 100-110 minutes. I continue receiving the warning, 'may not include all video when burning to DVD'???? Any help are assistance would be appreciated.
Ed

[flvideo]

Hi vdoeddy
I have had that happen occasionally and it is always a film that I hadn't cleared out of the film bin. Go to the finish screen and click on film and see if you have another film in there. Beyond that I don't know. I hope this helps. Bob...

[vdoeddy]

Bob, I had already checked to make sure no other project was included. This is the only project that is there. I have now re-set the audio to be compressed and it gave me more room. Going to try that now
Thanks for you reply.

[vdoeddy]

Okay, here's another twist. I reduced my project to only 58-minutes and when I go to Add Film to Arabesk, it shows -65% room left after adding. Sooooo frustating....I'm beginning to think I just need to buy a seperate DVD Burner to burn my projects to DVD.......

[BobC]

You might try to uninstall Arabesk and then re-install it to see if that helps.

[MichaelD]

Add a film of at least 60 seconds, if not a bit more. Let Arabesk do it's thing and then delete that project.

Then try your original film again (with quality set to normal & audio compressed) . . .