Can't get Rennie to boot.
-
- Posts: 618
- Joined: Thu Jun 18, 2009 8:59 pm
- Casablanca Unit: Bogart 6.1 for windows, Renommee, Avio pro, and a cassie classic
2 Sony PD170s, 2 panasonic dvx100s, 1 JVC DV300, 1 sony DCRhc42
1 panasonicpvGS120 - Location: Myakka City, Fl. flvideo50@hotmail.com
- Contact:
Can't get Rennie to boot.
I have had a problem with my Renommee. I was editing a piece and was on to title screen and I went to change a date on the title and it wouldn't let me take out the charactors with the backspace key and when I tried it came up with a circle with a line thru it. I discovered that when I pressed Ctrl and alt the curser came back but when I let it up the circle came back. I then held them down and shut it down thinking I would reboot. Now it won't boot at all. The yellow light is on but nothing on the monitor. Can anyone help? Thanks Bob Oh another thing I noticed after I shut it down was I have a DVD player plugged in the front and I noticed the Magnavox emblem was floating around so that says there is something going thru the Rennie. Help!
-
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Re: Can't get Rennie to boot.
I saved this from LEN, a Cassie owner a while back. Perhaps this can be of some help for you:
1. Make sure there is no disc in your DVD burner.
2. Have the unit connected to both a VGA and regular video monitor, and have a keyboard and trackball connected.
3. Start the machine.
4. When you see the first activity on the VGA, press the Delete key on the keyboard.
This should take you to the Bios Setup Utility.
5. Right arrow across to the boot section and select Boot Device Priority.
6. Select 1st boot priority and press Enter.
Highlight the Pioneer burner and press Enter.
7. Select 2nd boot priority and press Enter.
Highlight Casablanca BEV and press Enter.
8. Select 3rd boot priority and press Enter.
Highlight ST300 (not sure of the complete number) and press Enter.
9. Select 4th boot priority and press Enter.
Highlight Disabled and press Enter.
10. Press F10 and then OK to save settings.
System shoud now reboot to main menu on the video screen. This may take about 60 seconds.
From there on you can go to System Settings to install your software from the "All Software CD".
Be careful, (this applies to Reno Plus or a Sol Plus owners), not to install Smart Edit 5.1c from the "All Software CD".
If you are adding new drives, be sure to use only the 5.1c Renommee boot disc.
1. Make sure there is no disc in your DVD burner.
2. Have the unit connected to both a VGA and regular video monitor, and have a keyboard and trackball connected.
3. Start the machine.
4. When you see the first activity on the VGA, press the Delete key on the keyboard.
This should take you to the Bios Setup Utility.
5. Right arrow across to the boot section and select Boot Device Priority.
6. Select 1st boot priority and press Enter.
Highlight the Pioneer burner and press Enter.
7. Select 2nd boot priority and press Enter.
Highlight Casablanca BEV and press Enter.
8. Select 3rd boot priority and press Enter.
Highlight ST300 (not sure of the complete number) and press Enter.
9. Select 4th boot priority and press Enter.
Highlight Disabled and press Enter.
10. Press F10 and then OK to save settings.
System shoud now reboot to main menu on the video screen. This may take about 60 seconds.
From there on you can go to System Settings to install your software from the "All Software CD".
Be careful, (this applies to Reno Plus or a Sol Plus owners), not to install Smart Edit 5.1c from the "All Software CD".
If you are adding new drives, be sure to use only the 5.1c Renommee boot disc.
-
- Posts: 618
- Joined: Thu Jun 18, 2009 8:59 pm
- Casablanca Unit: Bogart 6.1 for windows, Renommee, Avio pro, and a cassie classic
2 Sony PD170s, 2 panasonic dvx100s, 1 JVC DV300, 1 sony DCRhc42
1 panasonicpvGS120 - Location: Myakka City, Fl. flvideo50@hotmail.com
- Contact:
Re: Can't get Rennie to boot.
Lou I got it up this morning and finished That project and another. I just shut it off about an hour so I will see if it boots in the morning. I will try what yo suggested if it doesn't boot in thmorning. Thanks...
-
- Posts: 2
- Joined: Mon Apr 25, 2011 10:35 am
- Casablanca Unit: Renommee and Kron
- Contact:
Rennie won't turn on at all
For the third time - My Rennie won't even come alive when pushing the power switch on the front.
1. I've used different power cords
2. Different Outlets
3. Unplugged everything overnight.
Push the button - Nothing - No lights, No pool or pets.
Any suggestions or just ship again toDenver.
Thank you.
1. I've used different power cords
2. Different Outlets
3. Unplugged everything overnight.
Push the button - Nothing - No lights, No pool or pets.
Any suggestions or just ship again toDenver.
Thank you.
-
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: Can't get Rennie to boot.
APN, Most likely the power supply, but as it could be several internal things I'd say it's time to call corporate.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Re: Can't get Rennie to boot.
Agree...it will be your power supply. Any surges lately?
-
- Posts: 233
- Joined: Thu Apr 03, 2008 1:31 pm
- Casablanca Unit: Renomee Plus, SE 7
- Location: North Carolina
- Contact:
Re: Can't get Rennie to boot.
APNVIDEO,
Did you ever get it fixed? My rene is doing the same thing. Tried new cords, outlets, nothing...
Jeff
Did you ever get it fixed? My rene is doing the same thing. Tried new cords, outlets, nothing...
Jeff
Jeff Philips
In Focus Studios
Raleigh/Durham
North Carolina
Cassie user since 1999
In Focus Studios
Raleigh/Durham
North Carolina
Cassie user since 1999
-
- Posts: 460
- Joined: Tue Apr 01, 2008 9:24 am
- Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras - Contact:
Re: Can't get Rennie to boot.
My Reno Plus recently wouldn't boot and it took a trip to Colorado and a new mother board to get it back running.
-
- Posts: 233
- Joined: Thu Apr 03, 2008 1:31 pm
- Casablanca Unit: Renomee Plus, SE 7
- Location: North Carolina
- Contact:
Re: Can't get Rennie to boot.
Does that mean you loose all that you are working on?
Jeff Philips
In Focus Studios
Raleigh/Durham
North Carolina
Cassie user since 1999
In Focus Studios
Raleigh/Durham
North Carolina
Cassie user since 1999
Who is online
Users browsing this forum: No registered users and 34 guests