audio out from s4000pro while using a DVI connection
-
- Posts: 1
- Joined: Fri Jul 12, 2013 1:20 pm
- Casablanca Unit: S4000pro
- Contact:
audio out from s4000pro while using a DVI connection
I'm using DVI to HDMI to my television monitor but I cannot get any audio out through any of the audio out ports either RCA or any of the six microphone mini-jack ports how do I get audio out while editing to my TV monitor using DVI HDMI connection? thanks
-
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: audio out from s4000pro while using a DVI connection
I'm using the HQ audio out sockets (mainly for convenience) into my TV's audio in.
Often the audio in phono's on a TV are linked to the component sockets so only work when the TV is set to that mode - so you get sound but no picture as it's not looking at the HDMI sockets.
However, on my TV, HDMI 1 is shown as HDMI/DVI and there's a 2.5 mm jack that is active 'when' I use that setting.
I think you just need to have a good look at the back of your TV and see what connections you have available . . .
Often the audio in phono's on a TV are linked to the component sockets so only work when the TV is set to that mode - so you get sound but no picture as it's not looking at the HDMI sockets.
However, on my TV, HDMI 1 is shown as HDMI/DVI and there's a 2.5 mm jack that is active 'when' I use that setting.
I think you just need to have a good look at the back of your TV and see what connections you have available . . .
Who is online
Users browsing this forum: No registered users and 11 guests