Stereo Mix in Solitaire

For all questions & tips related to Casablanca video editors.
Post Reply
roncamp
Posts: 42
Joined: Wed Apr 02, 2008 8:59 am
Casablanca Unit: Casablanca 4 Studio Pro
Windows 8.1
Bogart 9.2 for Windows
Location: Dallas, Texas
Contact:

Stereo Mix in Solitaire

Post by roncamp »

I imported some audio from a CD that was recorded in stereo but when I play it back in Solitaire it is in mono. I can play the CD on a different device that runs through the same mixer and hear it in stereo. I also tried recording directly through the audio line inputs (set for stereo) and got the same result. Any ideas?
CKNewman
Posts: 604
Joined: Tue Mar 25, 2008 2:56 am
Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
Location: Boston, MA
Contact:

Re: Stereo Mix in Solitaire

Post by CKNewman »

Hi Ron,

How are you monitoring the audio that is coming out of the Solitaire? Is there a button on that device that has a stereo/mono setting?
Craig Newman
IanPearson
Posts: 318
Joined: Wed Mar 26, 2008 4:45 am
Casablanca Unit: Studio Pro OS B4W V9
S6000 OS Bogart SE V9
Solitaire OS V9.1


Programs:- Most of the standard operating programs.
Location: Kingston upon Hull England
Contact:

Re: Stereo Mix in Solitaire

Post by IanPearson »

Ron
I have just done some testing on my Solitaire
1. Inputting direct from a CD
2. Using the from RCA input with the following settings “Input” - Front, “Mode” - Stereo

I both cases the audio was stereo, that’s checking the output with headphones and viewing the L/R indicators.

I’m not sure what you mean by
“I can play the CD on a different device that runs through the same mixer and hear it in stereo.”
You can import the audio direct from the CD, no mixer involved.

Ian
Ian Pearson S6000 Bogart SE7 - Solitaire OS V9.1 - Avio DV Pro OS V9.1
Programs:- Most programs, with the notable exception of CB Paint and Quadcam
Kingston upon Hull. England
roncamp
Posts: 42
Joined: Wed Apr 02, 2008 8:59 am
Casablanca Unit: Casablanca 4 Studio Pro
Windows 8.1
Bogart 9.2 for Windows
Location: Dallas, Texas
Contact:

Re: Stereo Mix in Solitaire

Post by roncamp »

I have traced the all the cables and checked all the settings on the mixer. Everything appears as it should be. I have also tried using different inputs on the mixer but the result is the same.

I have several pieces of equipment connected to the mixer. If I play the CD on another piece of equipment I can hear it in stereo coming out of the mixer. So I think I have eliminated the mixer as the source of the problem.
CKNewman
Posts: 604
Joined: Tue Mar 25, 2008 2:56 am
Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
Location: Boston, MA
Contact:

Re: Stereo Mix in Solitaire

Post by CKNewman »

When you play the audio out of the Solitaire, how are you listening to it? The Solitaire doesn't have a headphone out nor stereo speakers.
Craig Newman
roncamp
Posts: 42
Joined: Wed Apr 02, 2008 8:59 am
Casablanca Unit: Casablanca 4 Studio Pro
Windows 8.1
Bogart 9.2 for Windows
Location: Dallas, Texas
Contact:

Re: Stereo Mix in Solitaire

Post by roncamp »

I hear the audio output through the mixer. Other equipment connected to the mixer plays audio in stereo. I can hear the audio source CD on another device in stereo. But the audio from the Solitaire is mono.
IanPearson
Posts: 318
Joined: Wed Mar 26, 2008 4:45 am
Casablanca Unit: Studio Pro OS B4W V9
S6000 OS Bogart SE V9
Solitaire OS V9.1


Programs:- Most of the standard operating programs.
Location: Kingston upon Hull England
Contact:

Re: Stereo Mix in Solitaire

Post by IanPearson »

Ron
In my reply earlier, I said I can hear the audio in stereo, but I am listening from a head set plugged into the monitor, which means the audio is coming from the Solitaire SCART output. Where is your mixer audio coming from? the Solitaire RCA output?

Also I suggested you feed your audio direct in from the CD tray, not through the mixer. If you do this and the audio out is still mono, then the issue is possibly with the Solitaire output. However, if the playback output from the Solitaire is now stereo, then this would indicate some input issue.

If you can state where the Solitaire audio input and output is , it will help to pin point the issue.

Ian
Ian Pearson S6000 Bogart SE7 - Solitaire OS V9.1 - Avio DV Pro OS V9.1
Programs:- Most programs, with the notable exception of CB Paint and Quadcam
Kingston upon Hull. England
CKNewman
Posts: 604
Joined: Tue Mar 25, 2008 2:56 am
Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
Location: Boston, MA
Contact:

Re: Stereo Mix in Solitaire

Post by CKNewman »

Some ideas here:

I think that the Solitaire has loaded stereo audio, unless there is a software glitch. When was the last time you re-loaded the operating system? Your profile lists Smart Edit 8.0 - the last release with fixes was 8.3

You could try another method to monitor by running the audio out of your Solitaire into a stereo receiver or some kind of stereo recording device and listening.

Have you tried ripping the audio by putting the CD in the Solitaire itself and using the import button in the Audio Record window? You can adjust the audio from there.

Try recording the audio into the Solitaire and use the panning knobs for those channels and pan the left channel all the way left and the right channel all the way to the right. Play the audio you have in the Solitaire back through the mixer, right and left each with their own input. Then use the panning knobs for those channels and pan the left channel all the way left and the right channel all the way to the right. What kind of mixer is it?
Craig Newman
CKNewman
Posts: 604
Joined: Tue Mar 25, 2008 2:56 am
Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
Location: Boston, MA
Contact:

Re: Stereo Mix in Solitaire

Post by CKNewman »

In the last suggestion above I was referring to the panning knobs on the channels you are using on the mixer.
Craig Newman
roncamp
Posts: 42
Joined: Wed Apr 02, 2008 8:59 am
Casablanca Unit: Casablanca 4 Studio Pro
Windows 8.1
Bogart 9.2 for Windows
Location: Dallas, Texas
Contact:

Re: Stereo Mix in Solitaire

Post by roncamp »

After numerous cable swaps and mixer connection switches I was finally able to hear stereo coming out of the Solitaire. So I feel better that the problem was in the mixer, not the Solitaire. I was worried that there was some mono/stereo control in Smart Edit that I was missing.

By the way, to answer a previous question the mixer is a Mackie 12-channel mic/line mixer.

Thanks to all for your interest and suggestions.
Post Reply

Who is online

Users browsing this forum: No registered users and 48 guests