hi all,
this morning i switched on my Solitaire but all i had was an intermiting bleep sound and nothing on the screens (VGA and scart). On the facade liquid crystal of the solitaire "MACROSYSTEM" was visible and i noticed that the dvd deck was trying to activate, going on and off every 10 secs.
Any recomendations for me to make will be much appriciated.
Regards
jason axisa
MALTA
EUROPE
solitair not booting
-
digitalfotostudio
- Posts: 2
- Joined: Sat Jan 16, 2010 2:28 am
- Casablanca Unit: solitaire pal system
- Contact:
-
LouBruno
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Re: solitair not booting
1. Make sure there is no disc in your DVD burner.
2. Have the unit connected to both a VGA and regular video monitor, and have a keyboard and trackball connected.
3. Start the machine.
4. When you see the first activity on the VGA, press the Delete key on the keyboard.
This should take you to the Bios Setup Utility.
5. Right arrow across to the boot section and select Boot Device Priority.
6. Select 1st boot priority and press Enter.
Highlight the Pioneer burner and press Enter.
7. Select 2nd boot priority and press Enter.
Highlight Casablanca BEV and press Enter.
8. Select 3rd boot priority and press Enter.
Highlight ST300 (not sure of the complete number) and press Enter.
9. Select 4th boot priority and press Enter.
Highlight Disabled and press Enter.
10. Press F10 and then OK to save settings.
System shoud now reboot to main menu on the video screen. This may take about 60 seconds.
From there on you can go to System Settings to install your software from the "All Software CD".
Be careful, (this applies to Reno Plus or a Sol Plus owners), not to install Smart Edit from the "All Software CD
2. Have the unit connected to both a VGA and regular video monitor, and have a keyboard and trackball connected.
3. Start the machine.
4. When you see the first activity on the VGA, press the Delete key on the keyboard.
This should take you to the Bios Setup Utility.
5. Right arrow across to the boot section and select Boot Device Priority.
6. Select 1st boot priority and press Enter.
Highlight the Pioneer burner and press Enter.
7. Select 2nd boot priority and press Enter.
Highlight Casablanca BEV and press Enter.
8. Select 3rd boot priority and press Enter.
Highlight ST300 (not sure of the complete number) and press Enter.
9. Select 4th boot priority and press Enter.
Highlight Disabled and press Enter.
10. Press F10 and then OK to save settings.
System shoud now reboot to main menu on the video screen. This may take about 60 seconds.
From there on you can go to System Settings to install your software from the "All Software CD".
Be careful, (this applies to Reno Plus or a Sol Plus owners), not to install Smart Edit from the "All Software CD
-
digitalfotostudio
- Posts: 2
- Joined: Sat Jan 16, 2010 2:28 am
- Casablanca Unit: solitaire pal system
- Contact:
Re: solitair not booting
thanks Lou.
The problem was that neither on the VGA nor the scart TV there is no visual.
But for now and hope for a lot of time to come i solved the problem by dismantled the solitaire and took off the RAM , Cleaned and put them back. Switched ON and Wolla.....back to normal. Fortunetly no projects lost.
thanks.
jason axisa
Malta - Europe
The problem was that neither on the VGA nor the scart TV there is no visual.
But for now and hope for a lot of time to come i solved the problem by dismantled the solitaire and took off the RAM , Cleaned and put them back. Switched ON and Wolla.....back to normal. Fortunetly no projects lost.
thanks.
jason axisa
Malta - Europe
-
MichaelD
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: solitair not booting
How bizarre - I had exactly the same thing on a Solitaire here, except that the unit would also turn itself off too.
I changed the power supply & that sort of helped by virtue of giving a VGA (only) display.
Pulled the Ram out and cleaned the contacts and we appear to be back in business . . .
I changed the power supply & that sort of helped by virtue of giving a VGA (only) display.
Pulled the Ram out and cleaned the contacts and we appear to be back in business . . .
Who is online
Users browsing this forum: No registered users and 33 guests