Page 1 of 1

Old Tip - re-visited

Posted: Tue Jul 20, 2010 2:42 am
by MichaelD
I just re-discovered (by accident) this old tip from the Smart Edit machines that works on the Bogart ones too.

It's probably old news to some but if you aren't aware of it then it's useful.

When rendering, transitions, HD footage or DVD's (HD or otherwise) you can just push the off button and when its finished the machine turns itself off.
Great for those long renders you set off for an overnight run - meaning your machine isn't on for any unnecessary hours or until you decide to wake up ;-)

Re: Old Tip - re-visited

Posted: Tue Jul 20, 2010 2:20 pm
by Parsman
Hi Michael,

Great tip...but can you explain when you have to push the off button, is it after you've selected finish?

Thanks in advance.

Re: Old Tip - re-visited

Posted: Wed Jul 21, 2010 12:00 am
by jimmeeker
Yes, for this shut off trick to work, (which has been in all Cassie machines since the AVIO,) you MUST be in the finish screen and be doing a batch render from there......it does not work if you are rendering in the edit screen or any other screen except the "finish" screen.

When in that screen and after you hit the "Off" button, you will get a notice at the top of the screen that says, "Machine will automactically shut down when rendering is finished" This feature is very useful when doing all-night rendering, especially with the slower AVIO machines, and also when doing long High Def renders, etc.

Re: Old Tip - re-visited

Posted: Wed Jul 21, 2010 5:24 am
by Parsman
Thanks for the info Jim & Michael, I'll certainly try this option out the week as I've got two large HD projects to render...overnight!

Thanks guys.

Re: Old Tip - re-visited

Posted: Wed Jul 21, 2010 5:40 am
by CKNewman
Does this tip also apply when you are burning a DVD?

Re: Old Tip - re-visited

Posted: Wed Jul 21, 2010 10:17 am
by TimKennelly
Craig,

If you can figure a way to burn a DVD from the Finish menu it will. LOL

Tim

Re: Old Tip - re-visited

Posted: Thu Jul 22, 2010 3:04 am
by CKNewman
Hmmm......

Re: Old Tip - re-visited

Posted: Thu Jul 22, 2010 4:28 am
by MichaelD
Technically under the 'Finish Menu' Title we have Finish and Arabesk ;)

However this tip will allow the machine to turn off after it's rendered a DVD (DV or HD) project but not after the burn - however as this part of the process is reasonably quick it shouldn't really matter.

Re: Old Tip - re-visited

Posted: Thu Jul 22, 2010 8:29 pm
by TimKennelly
I stick with what I said.

If you can figure a way to burn a DVD from that Finish menu it will. LOL

Seriously, as Michael mentioned you can still use the trick in Arabesk for the Add Film portion which is the real time consumer and then just burn the DVD in minutes in the morning.

Re: Old Tip - re-visited

Posted: Fri Jul 23, 2010 3:08 am
by CKNewman
Thank you.