Page 1 of 1
Arabesk 3 burning Question
Posted: Thu Mar 17, 2011 7:44 am
by vdoeddy
All of a sudden, my Arabesk 3 will only burn up to 1-hour of video. I always have gotten at least 2-hours in the past. I only have the one project I'm working with that is about 100-110 minutes. I continue receiving the warning, 'may not include all video when burning to DVD'???? Any help are assistance would be appreciated.
Ed
Re: Arabesk 3 burning Question
Posted: Thu Mar 17, 2011 8:35 am
by flvideo
Hi vdoeddy
I have had that happen occasionally and it is always a film that I hadn't cleared out of the film bin. Go to the finish screen and click on film and see if you have another film in there. Beyond that I don't know. I hope this helps. Bob...
Re: Arabesk 3 burning Question
Posted: Thu Mar 17, 2011 1:17 pm
by vdoeddy
Bob, I had already checked to make sure no other project was included. This is the only project that is there. I have now re-set the audio to be compressed and it gave me more room. Going to try that now
Thanks for you reply.
Re: Arabesk 3 burning Question
Posted: Thu Mar 17, 2011 3:22 pm
by vdoeddy
Okay, here's another twist. I reduced my project to only 58-minutes and when I go to Add Film to Arabesk, it shows -65% room left after adding. Sooooo frustating....I'm beginning to think I just need to buy a seperate DVD Burner to burn my projects to DVD.......
Re: Arabesk 3 burning Question
Posted: Thu Mar 17, 2011 6:30 pm
by BobC
You might try to uninstall Arabesk and then re-install it to see if that helps.