HD Input Settings

[methuenbill]

I have the Sony HXR-NX5U the recording settings at default 1080/60i I do not get any sound. The default setting for audio is Linear PCM or I can set it to Dolby Digital. Any special settings for the 4000k. Do I need to set the camera different?

[LouBruno]

Are you using the external HD attachment?






-Sony NX-5 -AVCHD internal cards work. There is an external HD
and there is a report that Bogart SE did not recognize the same


Are you using the camera as the USB device?

Are you using a card reader?

Are your SD cards CLASS 6 and above?

Is the USB cable a new cable?

Did you try another new card after initializing a new card?

Did you shut-down the camera while still buffering to the card?------causes a COMPLETE corruption of a card.

Don't use Media Manager....use the BOGART side? MM is known to close-down and lose audio at times.

Trying to isolate the variables.

[methuenbill]

I am using a card reader through Boguart. A class 10 card. I can't figure how to run the video out through the camera. I take the cards out and load by the usb reader. The card loaded fine into my apple and I used imovie to make the short video. I can't use the imovie for bigger projects. I have the audio set for DV on the 4000. I will try a few more options.

[HansJoachimKoenig]

Connect the Cam via USB-Cable to S-4000Pro.
Set project to either 1440x1080i or 1920x1080i
Go to record menü and highlight USB-Record
Your cam files will show up
Chose desired files and OK
After read-in of files those are in your scene bin.

Here in Germany we had some reports that cards
containing AVCHD-Footage won't work using a cardreader.
Seems it has to do the cardreader isn't high speed capable.
So please try using your cam for importing

[methuenbill]

Tried to load through camera, the unit started to load then after a few mins it went to a blank screen. I have loaded sd video, but could not auto split without loosing audio sync. If I load hd I get the video, but no audio(using a card reader). I will try again tonight to load through the camera, but will not let the unit go to shutdown mode.

[Bobbie]

Since you mentioned that the camera is shutting down was wondering: Are you using the 'electric supply' for the camera?

I think camera will perform with the full charge of electricity, and will have difficulties and problems with battery, when trying to load.

[methuenbill]

I dont think its the camera as it still shows connected to the usb and says do not disconnect until the compter is powered down. I think the Casablanca is going into shutdown mode.

[Bobbie]

Are you using BOGART 3.2?

I did have some shutdown problems before upgrading to BOGART 3.2.............but now, my S4000 is working very well not shutting down. BOGART 4 is coming, but

I feel 3.2 is very stable and the pricing will be 'tiered anyway' so purchasing 3.2 now would be a good investment.

Also, you say that you think the Cassie unit is shutting down............what is it doing? Going to black screen? Do you need to re-boot? Changing the menu?

[MichaelD]

Set it to Dalby - PCM seems to be beyond the comprehension of the Bogart system for now . . .

[methuenbill]

The 4k screen goes to black and I have to do a forced shutdown. I will change the audio on the camera to dolby and run a test.