Recently replaced the hard drive on my Avio, now i'm attempting to create "horizontal scroller", message on a clip,
now when i type inside the box, (after so many words/numbers),
it causes the entire system to freeze, (for a second), and then restart.
ERROR: "An unrecoverable problem occurred, system will restart."
How do i get my message across, without the system crashing?
NOTE: Other "Type Effects", are working fine.
HORIZONTAL SCROLLER SHUTDOWN
-
Sidsniffles
- Posts: 9
- Joined: Wed Jan 12, 2011 7:16 pm
- Casablanca Unit: 2EA. Avio DVDs w/2TB HDD's, (SATA)
1EA. Prestige w/750gb HDD (ATA/IDE) - Location: USA
- Contact:
-
BobFoster
- Posts: 460
- Joined: Tue Apr 01, 2008 9:24 am
- Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras - Contact:
Re: HORIZONTAL SCROLLER SHUTDOWN
One version of SE OS software had a glitch that limited the quantity of letters/numbers on a line. It would then crash with the "red box of death". Changing to an earlier or later version of the OS software would correct the issue in the Titler.
To test for this issue, insert title into a scene without a "sized" box. Choose a small font size such as (35) and type in a series of letters/numbers. If the cassie crashes before you fill the single line, you have confirmed the buggy software version. I believe the limit before the crash was around 30 characters including spaces.
To test for this issue, insert title into a scene without a "sized" box. Choose a small font size such as (35) and type in a series of letters/numbers. If the cassie crashes before you fill the single line, you have confirmed the buggy software version. I believe the limit before the crash was around 30 characters including spaces.
-
CKNewman
- Posts: 604
- Joined: Tue Mar 25, 2008 2:56 am
- Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
- Location: Boston, MA
- Contact:
Re: HORIZONTAL SCROLLER SHUTDOWN
Bob, you have a good memory! I was typing my answer below when you posted yours, but I'll leave mine here anyway.
I have heard of problems that might be helped by one of the following:
You could try re-installing the operating system in the Avio with the problem.
The Avio may not be able to keep up with your typing speed. Try typing a little slower.
If you were working with other programs and effects before you opened the titler, those programs might not have released all of the memory they were using, so the titler may be running out of memory. This might also happen if you are experimenting with different effects and/or and correcting errors as you enter text. Try switching to another project and then back the project you're working on.
You could start another project just for "pre-assembling". Use the clipboard to bring over any video that you want the titling to scroll over. Create the scrolling text and then create a scene of it. Use the clipboard to send the scene back to your original project.
Let us know how things work out.
I have heard of problems that might be helped by one of the following:
You could try re-installing the operating system in the Avio with the problem.
The Avio may not be able to keep up with your typing speed. Try typing a little slower.
If you were working with other programs and effects before you opened the titler, those programs might not have released all of the memory they were using, so the titler may be running out of memory. This might also happen if you are experimenting with different effects and/or and correcting errors as you enter text. Try switching to another project and then back the project you're working on.
You could start another project just for "pre-assembling". Use the clipboard to bring over any video that you want the titling to scroll over. Create the scrolling text and then create a scene of it. Use the clipboard to send the scene back to your original project.
Let us know how things work out.
Craig Newman
Who is online
Users browsing this forum: No registered users and 61 guests