Using the S4000 w/ latest Bogart & Arabesk versions.
Just received Render Booster the other day and loaded up per the instructions (did not do a destructive install). Typically it takes me ~ 36 hours to prep a ~ 170 minute film to burn to Blu Ray. With Render Booster, it took ~ 12 hours before being ready to burn but upon burning it only burned ~ 10 minutes or so of footage (based upon looking at the back of the disc where the "writing" is). I have not tried to view it yet.
Is there something I did wrong with setting up Render Booster? The words "Render Booster" showed up in Arabesk and the device was lit and got hot so I assume it was working. i did not a destructive install of hard drive before trying to use - do I need to?
Any ideas appreciated.
Render Booster
-
- Posts: 144
- Joined: Fri Jun 19, 2009 10:13 am
- Casablanca Unit: S4000 PRO
- Contact:
-
- Posts: 460
- Joined: Tue Apr 01, 2008 9:24 am
- Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras - Contact:
Re: Render Booster
What settings did you use in the Arabesk settings window and what OS version are you using??
-
- Posts: 144
- Joined: Fri Jun 19, 2009 10:13 am
- Casablanca Unit: S4000 PRO
- Contact:
Re: Render Booster
hi bob,
Bogart 5.3
Settings:
- max write speed
- Type 1 Disk Tr Format
- Blu Ray 25 gb
Bogart 5.3
Settings:
- max write speed
- Type 1 Disk Tr Format
- Blu Ray 25 gb
-
- Posts: 464
- Joined: Mon Mar 24, 2008 10:06 pm
- Casablanca Unit: Avio, Solitaire, with OS 9.1 and S-6000 with Bogart 5 & all software
- Location: Milan, Illinois
- Contact:
Re: Render Booster
Hello,
I don't have a render booster yet, my S-6000 came with render booster software
already installed in it...... but every time I turn it on, it has a message that says,
I need to do a BIOS update to allow it to work properly, and to check with my dealer
or the Cassie web site for instructions.
Have you done this step for the render booster on your editor?
I don't have a render booster yet, my S-6000 came with render booster software
already installed in it...... but every time I turn it on, it has a message that says,
I need to do a BIOS update to allow it to work properly, and to check with my dealer
or the Cassie web site for instructions.
Have you done this step for the render booster on your editor?
Jim Meeker
The Old Timer
Founder of the
"March Get Together"
We Remember
12-7-41 and 9-11-01
Milan, Illinois
S-6000 w/Bogart 5 /Solitaire, Avio DVD / All Software OS 9.1/ Panasonic HMC150p AVCHD Camcorder
The Old Timer
Founder of the
"March Get Together"
We Remember
12-7-41 and 9-11-01
Milan, Illinois
S-6000 w/Bogart 5 /Solitaire, Avio DVD / All Software OS 9.1/ Panasonic HMC150p AVCHD Camcorder
-
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: Render Booster
..... but every time I turn it on, it has a message that says,
I need to do a BIOS update to allow it to work properly, and to check with my dealer
or the Cassie web site for instructions.
There are only a few machines that need a BIOS update and, if needed, you do get this message.
Who is online
Users browsing this forum: No registered users and 8 guests