Avio on off button broken
Posted: Sun Apr 26, 2015 1:34 pm
Tried to set up my avio after years of no use and the front on off button is broken. Cant seem to see a switch through the hole.
CasablancaForum.us
Online Community for Casablanca Video Editors
https://casablancaforum.us/
Avio on off button broken
Page 1 of 1
Re: Avio on off button broken
Posted: Sun Apr 26, 2015 7:01 pm
Read this post:viewtopic.php?f=14&t=1920&p=10844&hilit ... ton#p10844
Re: Avio on off button broken
Posted: Mon Apr 27, 2015 3:26 am
As it's an Avio DVD it must be one with the on/off in the middle area and so the little micro switch might have become detached.
These can be repaired but possibly more of a pain would be if the silver plastic (outside) button has gone or become detached ?
It's much rarer for that to happen but is not so easy to get a replacement (if at all) as it's part of the front facia.
If the inside switch is still in one piece (or if you have it repaired) you can use a pencil with an eraser on the end to switch it on . . .
These can be repaired but possibly more of a pain would be if the silver plastic (outside) button has gone or become detached ?
It's much rarer for that to happen but is not so easy to get a replacement (if at all) as it's part of the front facia.
If the inside switch is still in one piece (or if you have it repaired) you can use a pencil with an eraser on the end to switch it on . . .
Re: Avio on off button broken
Posted: Thu May 14, 2015 3:38 am
On button pushed in to far and broke micro switch. Poor way to make an on off button. Brought the PCB into work and wired in a real switch. No I will use the unit to load in vhs tapes ect and make dvds. 