Page 1 of 1

Flashing Blue Light on Karat / No signal to Monitor

Posted: Thu Dec 20, 2018 2:50 pm
by DaleVenvertloh
For a variety of reasons, I have not used my Karat which I purchased in 2014 for several years. Today when I turned it on the main menu failed to come up on the monitor which indicated that there was "no signal." A blue light next to the power button continues to flash off and on. Any suggestions as to the meaning of the blue light and/or how receive a signal on the monitor so I know what I'm dealing with. Thanks in advance for any suggestions.

Dale Venvertloh

Re: Flashing Blue Light on Karat / No signal to Monitor

Posted: Wed Jan 16, 2019 8:23 am
by mhuebmer
:idea:
Since there are no prior answers... if the topic has not been solved, take a look HERE.

Google Chrome or Microsoft Edge translation plugins should do the job. Feedback if the problem was solved would be nice. :P

Re: Flashing Blue Light on Karat / No signal to Monitor

Posted: Wed Jan 16, 2019 3:06 pm
by bethklinger
This appears to be an epidemic. Start by Replacing your BIOS battery. Even with the machines off this battery can die.
Beth Klinger

Re: Flashing Blue Light on Karat / No signal to Monitor

Posted: Thu Jan 17, 2019 7:39 am
by MichaelD
Generally a flashing blue means that the system hasn't started up properly and therefore you won't get a picture on any screen.

This is normally, but not exclusively, due to a power supply failure. The external one is easy to change, as it's external, but there is also a smaller one inside that is more complicated.

I'd suggest contacting your dealer / Macro US and get it looked at.