S4100 NOT RECORDING IN AFTER 40% USED MEMORY

For all questions & tips related to Casablanca video editors.
Post Reply
SPRINGSPRUNG
Posts: 10
Joined: Tue Mar 16, 2010 6:40 am
Casablanca Unit: S 4100
Contact:

S4100 NOT RECORDING IN AFTER 40% USED MEMORY

Post by SPRINGSPRUNG »

Chet,

Do you have any suggestions about why my s4100 will not record in hd mode after it reaches 40% capacity of disk space. It just defaults after recording one frame and the only way to get it to work is to remove a lot of my archived footage and eventually it will record again for a week until I get over the 40% mark. This really costs me a lot of time by having to back up this footage on dvd and it isnt as good as the footage that is native hd. I called tech support and after $12.00 they have no ideas. I am also having errors and restarts every time I try to enter text that is archived when the editor starts up. After a couple of errors the archived text will work without throwing it into a shutdown. any ideas you have about the problem bringing in the footage would be appreciated. Sometimes it works but it wont import the whole clip just a portion of it. I have had so many problems with the hd projects, but I have to have the quality for our national broadcast, but the numerous problems have been very troublesome.

thanks for your help!
CKNewman
Posts: 604
Joined: Tue Mar 25, 2008 2:56 am
Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
Location: Boston, MA
Contact:

Re: S4100 NOT RECORDING IN AFTER 40% USED MEMORY

Post by CKNewman »

I know that with Generation 2 machines like my Kron+, many ills were cured by by a destructive install of the OS. If you can use an external hard drive to archive material (and then reload what you need) why not try that? Or is there an advantage to using DVDs to archive/backup?
Craig Newman
SPRINGSPRUNG
Posts: 10
Joined: Tue Mar 16, 2010 6:40 am
Casablanca Unit: S 4100
Contact:

Re: S4100 NOT RECORDING IN AFTER 40% USED MEMORY

Post by SPRINGSPRUNG »

thanks Craig. I dont have an external hard drive. I bought the 4100 because of the terabyte of storage. so dvd is the only possible archive for me. however I have never been able to get the machine to burn a blu ray that works and the dvd's are analog and not good quality.
LouBruno
Posts: 6446
Joined: Mon Mar 24, 2008 5:49 pm
Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera

SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20

Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com
Location: Lancaster, PA
Contact:

Re: S4100 NOT RECORDING IN AFTER 40% USED MEMORY

Post by LouBruno »

You can archive on a flash drive, SD card etc. as long as you have enough space. You don't need to have an external drive per say.
SPRINGSPRUNG wrote:thanks Craig. I dont have an external hard drive. I bought the 4100 because of the terabyte of storage. so dvd is the only possible archive for me. however I have never been able to get the machine to burn a blu ray that works and the dvd's are analog and not good quality.
SPRINGSPRUNG
Posts: 10
Joined: Tue Mar 16, 2010 6:40 am
Casablanca Unit: S 4100
Contact:

Re: S4100 NOT RECORDING IN AFTER 40% USED MEMORY

Post by SPRINGSPRUNG »

LouBruno,

How do I archive to SD card on the 4100? I have no outputs on the machine to export into SD card? How would I put it on a usb flash? What connection and how?

Many Thanks,
SpringSprung
LouBruno
Posts: 6446
Joined: Mon Mar 24, 2008 5:49 pm
Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera

SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20

Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com
Location: Lancaster, PA
Contact:

Re: S4100 NOT RECORDING IN AFTER 40% USED MEMORY

Post by LouBruno »

No outputs? No USB ports? Card reader will work with the USB.

SPRINGSPRUNG wrote:LouBruno,

How do I archive to SD card on the 4100? I have no outputs on the machine to export into SD card? How would I put it on a usb flash? What connection and how?

Many Thanks,
SpringSprung
Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests