I seem to have a problem getting my final DVD or tape burn with time code embeded in the video. I finish the story board and go to finish screen, check Casablanca time code. Select where to place the font in the video and it shows that it is there. I even tried it with the time code and the date and time.
But when I dub it to tape or try to burn a DVD with time code in it, it does not appear on either one. I want time code on the video so it can be review by a customer for corrections. Never tried this before.
Time code burn in
-
RonaldPawlak
- Posts: 170
- Joined: Tue Apr 01, 2008 5:02 pm
- Casablanca Unit: Bogart 5.3 O.S.,Arabesk 5.4c, S4K Pro, most software, not a lot of HD software, Exterrnal USB blu-ray burner, Just purchase (2) XF-100 Canon cameras and one VIXIA HF-S10, HD cameras. (2) Senheisser Wireless Mics.
- Location: Milwaukee, Wisconsin
- Contact:
-
RonaldPawlak
- Posts: 170
- Joined: Tue Apr 01, 2008 5:02 pm
- Casablanca Unit: Bogart 5.3 O.S.,Arabesk 5.4c, S4K Pro, most software, not a lot of HD software, Exterrnal USB blu-ray burner, Just purchase (2) XF-100 Canon cameras and one VIXIA HF-S10, HD cameras. (2) Senheisser Wireless Mics.
- Location: Milwaukee, Wisconsin
- Contact:
Re: Time code burn in
Hi Ron,
In order to install the burned in time code to the finished product for the client to make selections and corrections to a video. First you have to go to the finish screen and highlite the Casablanca time code, the font you want to use and if date selected. Then you must locate where you want the time code to be placed on the screen. When you go back to the finish screen, look at the top of the screen and you will see the CREATE button highlited. When you select it you will see the video showing the time code being burned into the video story board. When completed it will be located in the scene bid as one of the scenes. Put it into the story board and burn your DVD or tape master. Yes I did answer my own question, if you haven't noticed.
In order to install the burned in time code to the finished product for the client to make selections and corrections to a video. First you have to go to the finish screen and highlite the Casablanca time code, the font you want to use and if date selected. Then you must locate where you want the time code to be placed on the screen. When you go back to the finish screen, look at the top of the screen and you will see the CREATE button highlited. When you select it you will see the video showing the time code being burned into the video story board. When completed it will be located in the scene bid as one of the scenes. Put it into the story board and burn your DVD or tape master. Yes I did answer my own question, if you haven't noticed.
-
CKNewman
- Posts: 604
- Joined: Tue Mar 25, 2008 2:56 am
- Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
- Location: Boston, MA
- Contact:
Re: Time code burn in
Thank you for both answers. It's been a while since I've had my eyes checked, and I have been under a lot of stress lately..... 
Craig Newman
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: Time code burn in
Ron,
In the old Avio days I just output analog via the monitor output to tape.
I knew they had added this capability digitally for DVD and firewire, but couldn't remember how and don't have a unit any longer to play with to remind myself so couldn't help.
Did you figure it out yourself or did someone contact you off board?
Thanks for sharing it with the others here.
In the old Avio days I just output analog via the monitor output to tape.
I knew they had added this capability digitally for DVD and firewire, but couldn't remember how and don't have a unit any longer to play with to remind myself so couldn't help.
Did you figure it out yourself or did someone contact you off board?
Thanks for sharing it with the others here.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
RonaldPawlak
- Posts: 170
- Joined: Tue Apr 01, 2008 5:02 pm
- Casablanca Unit: Bogart 5.3 O.S.,Arabesk 5.4c, S4K Pro, most software, not a lot of HD software, Exterrnal USB blu-ray burner, Just purchase (2) XF-100 Canon cameras and one VIXIA HF-S10, HD cameras. (2) Senheisser Wireless Mics.
- Location: Milwaukee, Wisconsin
- Contact:
Re: Time code burn in
Yes Tim, I figured it out my self by, accident. I happen to go to the finish screen to archive to tape the video I edited today, so I wouldn't loose my days work. You know, back up your hard drive.
I notice the Casablanca Time Code promp was still checked. Then, I looked up and saw the Create button was highlighted and wondered why. So I clicked it and lo and behold there was the video showing me the video being time coded in a little window. The more I play and work with the unit, the more I learn. Now we all are a little smarted.
I notice the Casablanca Time Code promp was still checked. Then, I looked up and saw the Create button was highlighted and wondered why. So I clicked it and lo and behold there was the video showing me the video being time coded in a little window. The more I play and work with the unit, the more I learn. Now we all are a little smarted.
-
MichaelD
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: Time code burn in
Hi Ron,
It is my understanding (with Bogart at least) that this 'feature' is only to output to tape. They were going to implement something to allow copying said footage to a DVD, and creating a scene in the scene bin would be the ideal answer, but so far this hasn't happened.
I'll check it out . . . in PAL anyway . . .
It is my understanding (with Bogart at least) that this 'feature' is only to output to tape. They were going to implement something to allow copying said footage to a DVD, and creating a scene in the scene bin would be the ideal answer, but so far this hasn't happened.
I'll check it out . . . in PAL anyway . . .
-
RonaldPawlak
- Posts: 170
- Joined: Tue Apr 01, 2008 5:02 pm
- Casablanca Unit: Bogart 5.3 O.S.,Arabesk 5.4c, S4K Pro, most software, not a lot of HD software, Exterrnal USB blu-ray burner, Just purchase (2) XF-100 Canon cameras and one VIXIA HF-S10, HD cameras. (2) Senheisser Wireless Mics.
- Location: Milwaukee, Wisconsin
- Contact:
Re: Time code burn in
Hi MichaelD,
Yes you are correct, I found that out last night after trying several times. So I burned a copy to tape, it worked fine, then reloaded it into another project and with arabask burned a copy to DVD. A round about, time comsuming way of doing it, but that is the only way it will work. I was going to mention that today when I discovered it, but you beat me to it.
Yes, it would really be nice to at least have it create a copy to the scene bin and then put it in the story board, so with arabask you could burn it to DVD.
Yes you are correct, I found that out last night after trying several times. So I burned a copy to tape, it worked fine, then reloaded it into another project and with arabask burned a copy to DVD. A round about, time comsuming way of doing it, but that is the only way it will work. I was going to mention that today when I discovered it, but you beat me to it.
Yes, it would really be nice to at least have it create a copy to the scene bin and then put it in the story board, so with arabask you could burn it to DVD.
-
MichaelD
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: Time code burn in
Nice is not the word - it's almost essentialRonaldPawlak wrote:
Yes, it would really be nice to at least have it create a copy to the scene bin and then put it in the story board, so with arabask you could burn it to DVD.
Think how many DVD's you could send for approval by the client and NOT have them rip off multiple 'extra' copies because you have put this code on it
-
LouBruno
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Re: Time code burn in
If a user of a regular Smart Edit series OS (non-Bogart) has CB PAINT 2, there is a TIME CODE application that allows the editor to burn-in TIME CODE and then send the scene(s) back to the scene bin thus to the Story Board.
The editor, in CB PAINT, can even assign a numerical sequence to the time code of his choosing. CB PAINT will work with Gen 2 systems only.
The editor, in CB PAINT, can even assign a numerical sequence to the time code of his choosing. CB PAINT will work with Gen 2 systems only.
MichaelD wrote:Nice is not the word - it's almost essentialRonaldPawlak wrote:
Yes, it would really be nice to at least have it create a copy to the scene bin and then put it in the story board, so with arabask you could burn it to DVD.
Think how many DVD's you could send for approval by the client and NOT have them rip off multiple 'extra' copies because you have put this code on it
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: Time code burn in
What about those who have purchased the cutting edge Bogart machines that own CB PAINT?If a user of a regular Smart Edit series OS (non-Bogart) has CB PAINT 2
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
Who is online
Users browsing this forum: No registered users and 8 guests