Reno Plus won't boot
-
- Posts: 460
- Joined: Tue Apr 01, 2008 9:24 am
- Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras - Contact:
Reno Plus won't boot
I have tried Lou's "Bios" set up and that didn't work. When I start the Reno+ it will go as far is the "Casablanca Renommee" screen with white back ground and stop. I have tried three different HDs with the same result. These hard drives work fine in another Reno+. I've unplugged the unit, disconnected all wires, and even tried re-installing the software disk. The result was a message that "no hard drive was detected to install the software." I took the cover off and check the HD connections. All were "glued" in place with some sort of clear hard substance except one multi pin connector. I removed and replaced it with care to be sure it went all the way in. The HD connector inside the unit visible from the front doesn't have any bent pins. I Re-assembled and no change. The unit stops at the Casablanca flag screen. Any other suggestions beside calling boulder?
-
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Re: Reno Plus won't boot
Double check the BIOS.. It boots off of the DVD drive. Sounds like a video card issue.
-
- Posts: 460
- Joined: Tue Apr 01, 2008 9:24 am
- Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras - Contact:
Re: Reno Plus won't boot
At #8 There is no ST300 or any other number. The last item in the blue window is "Disabled". There is no 4th boot item in the "Boot Device Priority" window.
8. Select 3rd boot priority and press Enter.
Highlight ST300 (not sure of the complete number) and press Enter.
9. Select 4th boot priority and press Enter.
Highlight Disabled and press Enter.
10. Press F10 and then OK to save settings.
System shoud now reboot to main menu on the video screen. This may take about 60 seconds.
From there on you can go to System Settings to install your software from the "All Software CD".
Be careful, (this applies to Reno Plus or a Sol Plus owners), not to install Smart Edit 5.1c from the "All Software CD".
If you are adding new drives, be sure to use only the 5.1c Renommee boot disc.
LOU BRUNO
Gocycle@optonline.net
LouBruno
Posts: 2549
Joined: Mon Mar 24, 2008 5:49 pm
Location: Long Island New York
Casablanca Unit: SE 4000 PRO and 4100 PRO with Blu-ray with ALL SOFTWARE, BOGART 4, Arabesk HD 4.13 series, Two of THE FLIP MINO personal HD web-style cameras-Gen 3, Two I-Pods 4G/HD recording, PANASONIC AG AC-130P HD 3-CHIP Camera, CANON AVCHD HF G10, GoPRO HD2, SONY HDR-CX150 small HD pocket camera, Two Samsung BD D5700 Blu-ray players.
TWO SONY HDV decks, JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, Canon G-7, 7 professional bicycles, two camels and a donkey ........ Gocycle@optonline.net
8. Select 3rd boot priority and press Enter.
Highlight ST300 (not sure of the complete number) and press Enter.
9. Select 4th boot priority and press Enter.
Highlight Disabled and press Enter.
10. Press F10 and then OK to save settings.
System shoud now reboot to main menu on the video screen. This may take about 60 seconds.
From there on you can go to System Settings to install your software from the "All Software CD".
Be careful, (this applies to Reno Plus or a Sol Plus owners), not to install Smart Edit 5.1c from the "All Software CD".
If you are adding new drives, be sure to use only the 5.1c Renommee boot disc.
LOU BRUNO
Gocycle@optonline.net
LouBruno
Posts: 2549
Joined: Mon Mar 24, 2008 5:49 pm
Location: Long Island New York
Casablanca Unit: SE 4000 PRO and 4100 PRO with Blu-ray with ALL SOFTWARE, BOGART 4, Arabesk HD 4.13 series, Two of THE FLIP MINO personal HD web-style cameras-Gen 3, Two I-Pods 4G/HD recording, PANASONIC AG AC-130P HD 3-CHIP Camera, CANON AVCHD HF G10, GoPRO HD2, SONY HDR-CX150 small HD pocket camera, Two Samsung BD D5700 Blu-ray players.
TWO SONY HDV decks, JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, Canon G-7, 7 professional bicycles, two camels and a donkey ........ Gocycle@optonline.net
Who is online
Users browsing this forum: No registered users and 64 guests