'How to Video': Solitaire Opened
-
- Posts: 44
- Joined: Mon Mar 31, 2008 7:24 pm
- Casablanca Unit: S4000, 3 Solitaires OS 9 (8), Arabesk 4, most all software, 2 Avios
- Location: Flint, Michigan
- Contact:
'How to Video': Solitaire Opened
Fellow Cassie Members, last week Tim Kennelly opened one of my solitaires for some upgrading and we made a short 'how to video' and would like to share the advise in case someone is in need of the information. http://www.vimeo.com/1398616
Last edited by Bobbie on Fri Jul 25, 2008 4:50 pm, edited 1 time in total.
-
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: 'How to Video': Solitaire Opened
Bobbie took the time to update the video to include the initial caution I added after someone mentioned I had not shown that the sleds should be taken out first and I decided I should caution about unplugging the unit and avoiding static shock damage,etc and that changed the location of the video to http://www.vimeo.com/1398616.
You get that private message apparently any time you try to access a video that does not exist as well as if it is actually "private".
To anyone considering performing either of these operations, as mentioned, this did not start out to be a how to video and Bobbie picked up the cam a bit into the disassembly so I would like to add a couple of cautions.
Unplug the unit prior to doing anything.
I also recommend disconnecting everything from the unit as well and notate where everything came from.
Remove both drive sleds prior to taking the six screws out of the back so you do not forget about removing them prior to attempting to remove the top half.
Ground yourself (touch metal) prior to opening the unit and stay away from touching anything besides the cables, drive and burner to avoid shorting anything out.
Be very careful not to drop a screw into the unit (unlikely to cause problems by itself, but still.
If you do do not reach into the unit to remove screw, rather take the unit firmly into your hands, turn it over and gentle "shake" the screw out.
On that same note use a small dish, lid or something to contain the loose small screws so you do not lose them.
These are fairly soft headed screws being small so use firm pressure when unscrewing them the first time to avoid stripping their phillips slotted heads.
That pretty much sums up what comes to mind that was not in the video.
Tim
You get that private message apparently any time you try to access a video that does not exist as well as if it is actually "private".
To anyone considering performing either of these operations, as mentioned, this did not start out to be a how to video and Bobbie picked up the cam a bit into the disassembly so I would like to add a couple of cautions.
Unplug the unit prior to doing anything.
I also recommend disconnecting everything from the unit as well and notate where everything came from.
Remove both drive sleds prior to taking the six screws out of the back so you do not forget about removing them prior to attempting to remove the top half.
Ground yourself (touch metal) prior to opening the unit and stay away from touching anything besides the cables, drive and burner to avoid shorting anything out.
Be very careful not to drop a screw into the unit (unlikely to cause problems by itself, but still.
If you do do not reach into the unit to remove screw, rather take the unit firmly into your hands, turn it over and gentle "shake" the screw out.
On that same note use a small dish, lid or something to contain the loose small screws so you do not lose them.
These are fairly soft headed screws being small so use firm pressure when unscrewing them the first time to avoid stripping their phillips slotted heads.
That pretty much sums up what comes to mind that was not in the video.
Tim
Last edited by TimKennelly on Thu Jul 24, 2008 3:30 pm, edited 1 time in total.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
- Posts: 304
- Joined: Mon Mar 24, 2008 7:51 pm
- Casablanca Unit: Renommee Plus w/SE8 and all software
- Location: Metro Atlanta
- Contact:
Re: 'How to Video': Solitaire Opened
Nice work by both of you. This might start a trend, and to be honest I'm not sure why all of us "professionals" havent been doing this (cassie how to videos) already.
Chris Stone
Etched In Stone Video Productions
Renommee + SE9, All software, Panasonic AF100 Panasonic AG-160,
Adobe Production Suite CS6
Member # 5
Etched In Stone Video Productions
Renommee + SE9, All software, Panasonic AF100 Panasonic AG-160,
Adobe Production Suite CS6
Member # 5
-
- Posts: 243
- Joined: Mon Mar 31, 2008 1:10 pm
- Casablanca Unit: S6000 Effects 1,2,3,5,7,8 Blue Box World,
Arabesk 6.0a , Bogart 5.5c Disc Transfer 1.2 - Location: Cumbria UK
- Contact:
Re: 'How to Video': Solitaire Opened
Just went to view again and find it's now a private video,any reason why ?
Regards
Charles
Charles
-
- Posts: 76
- Joined: Wed Apr 02, 2008 6:13 am
- Casablanca Unit: S-4000 Pro
Solitaire SE 8.0 - Location: Clinton, Oklahoma
- Contact:
Re: 'How to Video': Solitaire Opened
Charles:
You might check the post titled "How to Video Opening Solitaire. They added the disclaimers.
Cliff
You might check the post titled "How to Video Opening Solitaire. They added the disclaimers.
Cliff
Cliff Hawkins
S-4000 Pro Bogart 4.1c
Solitaire SE 8
Cannon XH-A1
Canon GL-1
S-4000 Pro Bogart 4.1c
Solitaire SE 8
Cannon XH-A1
Canon GL-1
-
- Posts: 243
- Joined: Mon Mar 31, 2008 1:10 pm
- Casablanca Unit: S6000 Effects 1,2,3,5,7,8 Blue Box World,
Arabesk 6.0a , Bogart 5.5c Disc Transfer 1.2 - Location: Cumbria UK
- Contact:
-
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: 'How to Video': Solitaire Opened
The location of the video changed when Bobbie updated it and it can now be accessed here:
http://www.vimeo.com/1398616
http://www.vimeo.com/1398616
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
Who is online
Users browsing this forum: No registered users and 15 guests