Hello Everyone,
Has anyone ever had their default effects and transitions not load when installing the operating system? I had to install Bogart 2.4c, replacing 4.1g for reasons I won't get into right now. It worked fine but all default effects and transitions are missing. I can't create a black clip or a simple colored screen. And I can't do a simple crossfade. They are just not listed. If I click on default in these screens the selction is blank. Just to be sure I re installed the OS again with no luck. I can import a black clip from another project using the clipboard, but come on! What's going on here?
Deafault effects and transitions not loaded
-
Christopher6206
- Posts: 349
- Joined: Mon Mar 29, 2010 10:30 am
- Casablanca Unit: Travel 2 running Win Bogart 12. Karat, running Bogart 10.6, S-4000pro running Bogart 5.5c, Render Booster
- Location: St. Louis, MO USA
- Contact:
Deafault effects and transitions not loaded
Chris Crawford
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: Deafault effects and transitions not loaded
It sounds like you didn't load the default software such as the Pro software which you have to do when you do a full, destructive install.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
Christopher6206
- Posts: 349
- Joined: Mon Mar 29, 2010 10:30 am
- Casablanca Unit: Travel 2 running Win Bogart 12. Karat, running Bogart 10.6, S-4000pro running Bogart 5.5c, Render Booster
- Location: St. Louis, MO USA
- Contact:
Re: Deafault effects and transitions not loaded
I've installed everything. My machine has all software that is available. Are you talking about Pro Pack V 4.0? It is active. I can try deleting it and re installing. And when I installed 2.4c it was a full installation. The machine calls these efffect "default" so I figured it was installed with the OS.
Chris Crawford
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
-
Christopher6206
- Posts: 349
- Joined: Mon Mar 29, 2010 10:30 am
- Casablanca Unit: Travel 2 running Win Bogart 12. Karat, running Bogart 10.6, S-4000pro running Bogart 5.5c, Render Booster
- Location: St. Louis, MO USA
- Contact:
Re: Deafault effects and transitions not loaded
Well deleting Pro Pack did nothing. It does not include the default software. All software is active. Can you tell me what software specifically you are talking about? I've re installed the os twice now and still nothing. Can't make a still scene among other basic tasks.
Chris Crawford
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
-
LouBruno
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Re: Deafault effects and transitions not loaded
WOW! This is a new one on me. Hummm.....you observe NO defaults in even special and new?
Are the various effects, patterns, transition windows just blank?
How many softwares are "hidden" in the INSTALL project?
Did you use a USB etc. plugged into the unit to enter codes via the install product?
Did you get a prompt asking you to install 'Bonus Effects' when you went back to 2.4?
Are the various effects, patterns, transition windows just blank?
How many softwares are "hidden" in the INSTALL project?
Did you use a USB etc. plugged into the unit to enter codes via the install product?
Did you get a prompt asking you to install 'Bonus Effects' when you went back to 2.4?
-
CasablancaExpert
- Posts: 841
- Joined: Fri Jan 16, 2009 9:34 am
- Casablanca Unit: S3000, S4000 PRO, Renommee Plus
- Contact:
Re: Deafault effects and transitions not loaded
I had a vague memory of this and sure enough, I think your problem is this... when you performed a clean installation and went back to Bogart V2 you would think you were ok, but V2 required some of the software that was present in Bogart V1. I believe if you load Bogart V1 and then update to V2 you will have your missing operators returned.
See this article for details: http://cassieexpert.live.subhub.com/articles/20090912 (I have made this article a public, free resource for the next few days - then it will return to a Members Only article). Hope that helps!
Regards,
Chet
See this article for details: http://cassieexpert.live.subhub.com/articles/20090912 (I have made this article a public, free resource for the next few days - then it will return to a Members Only article). Hope that helps!
Regards,
Chet
-
Christopher6206
- Posts: 349
- Joined: Mon Mar 29, 2010 10:30 am
- Casablanca Unit: Travel 2 running Win Bogart 12. Karat, running Bogart 10.6, S-4000pro running Bogart 5.5c, Render Booster
- Location: St. Louis, MO USA
- Contact:
Re: Deafault effects and transitions not loaded
On the advice of Chet, I checked and sure enough Bogart 1.7c was not activated. After doing so I now have all my default effects under new. Color, black, kseraba, etc. I also now have Color to grey, control colr, cotrol image, etc under special. Those were missing also previously. I still do not have crossfade in my transitions. I tried re booting but nothing. All software is active. I'm probably missing other transitions but right now I'm not aware of it. Just missing crossfade. thanks Chet. If you have another thing I can try please list, thanks!
Chris Crawford
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
-
Christopher6206
- Posts: 349
- Joined: Mon Mar 29, 2010 10:30 am
- Casablanca Unit: Travel 2 running Win Bogart 12. Karat, running Bogart 10.6, S-4000pro running Bogart 5.5c, Render Booster
- Location: St. Louis, MO USA
- Contact:
Re: Deafault effects and transitions not loaded
Ok nevermind! Though crossfade was missing for the transitions list, I changed the selection at the bottom from "All" to "default" and bam! Crossfade showed up. When I went back to "all" crossfade was listed. WHew, glad we got that figured out. Thanks again to everyone. Always something to be learned.
Chris Crawford
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
Travel 2, running Bogart 12, All software
Karat with Bogart 10.3 , Arabesk 7
S-4000 Pro with Bogart 5.5c, Render Booster, most software
Panasonic AG-AC 160, Sony NEX-VG900, Sony NXCAM - NX30U
Cannon XF-705
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: Deafault effects and transitions not loaded
I said it sounds like you hadn't loaded all the default software such as the Pro software (yes, Pro Pack).
I have been away from the software/system for a couple of years so it's hard to remember all the various default software and their names.
Bogart 1.7c was the default software you apparently had not activated.
I agree it is less than intrinsically obvious what is and is not the default software.
Sorry, I was not available to be online until now today.
Glad you got your transitions back up and running.
I have been away from the software/system for a couple of years so it's hard to remember all the various default software and their names.
Bogart 1.7c was the default software you apparently had not activated.
I agree it is less than intrinsically obvious what is and is not the default software.
Sorry, I was not available to be online until now today.
Glad you got your transitions back up and running.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
CasablancaExpert
- Posts: 841
- Joined: Fri Jan 16, 2009 9:34 am
- Casablanca Unit: S3000, S4000 PRO, Renommee Plus
- Contact:
Re: Deafault effects and transitions not loaded
I am so glad that worked and you now have your default set of effects available.
That bottom selector has 'got' me a few times as well - as recently as last month... it is a nice feature to have when you want it but important to remember it's there in my moments of brief panic
Regards,
Chet
That bottom selector has 'got' me a few times as well - as recently as last month... it is a nice feature to have when you want it but important to remember it's there in my moments of brief panic
Regards,
Chet
Who is online
Users browsing this forum: No registered users and 45 guests