My Prestige won't recognize any firewire device...front or back inputs. Anyone ever experience this? and if so any solutions, like replacement of parts?
Your welcome to call 417-337-5901
Thanks in advance,
Doug B.
Firewire is Dead
-
- Posts: 8
- Joined: Mon Aug 17, 2009 7:11 pm
- Casablanca Unit: Renommee Fully Loaded OS 9
Prestige 80% Loaded OS 9
Prestige 40% Loaded OS 9
Cassie Classic DV
Canons XL1 XL2 - Location: Branson, Mo.
- Contact:
-
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: Firewire is Dead
Sure, bad news, it's easy to fry the DV board if you hot-swap (aka: connect or disconnect a firewire device with both the Prestige and cam powered on).
That was the most expensive repair at Boulder at one time, I believe like $650.
I think they sent out a notice a year or so ago that they no longer support repairs like that as they ran out of the old parts, but not positive about that.
I'd contact official tech support and inquire about that.
That was the most expensive repair at Boulder at one time, I believe like $650.
I think they sent out a notice a year or so ago that they no longer support repairs like that as they ran out of the old parts, but not positive about that.
I'd contact official tech support and inquire about that.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: Firewire is Dead
Also check the DV sockets very carefully - all four pins must look the same and be at the same distance from the front of the socket.
"If" a pin has been pushed in it may be touching somewhere behind the socket. This can cause both sockets not to work.
"If" a pin has been pushed in it may be touching somewhere behind the socket. This can cause both sockets not to work.
-
- Posts: 460
- Joined: Tue Apr 01, 2008 9:24 am
- Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras - Contact:
Re: Firewire is Dead
Have you tried additional firewire cables?? Have you tried importing/exporting to a different firewire device to/from the Cassie???
-
- Posts: 8
- Joined: Mon Aug 17, 2009 7:11 pm
- Casablanca Unit: Renommee Fully Loaded OS 9
Prestige 80% Loaded OS 9
Prestige 40% Loaded OS 9
Cassie Classic DV
Canons XL1 XL2 - Location: Branson, Mo.
- Contact:
Re: Firewire is Dead
Yes to all the above, this really stinks!BobFoster wrote:Have you tried additional firewire cables?? Have you tried importing/exporting to a different firewire device to/from the Cassie???
-
- Posts: 460
- Joined: Tue Apr 01, 2008 9:24 am
- Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras - Contact:
Re: Firewire is Dead
Try importing to the Prestige using S-Video. If that works you probably have a dead firewire card.
-
- Posts: 8
- Joined: Mon Aug 17, 2009 7:11 pm
- Casablanca Unit: Renommee Fully Loaded OS 9
Prestige 80% Loaded OS 9
Prestige 40% Loaded OS 9
Cassie Classic DV
Canons XL1 XL2 - Location: Branson, Mo.
- Contact:
Re: Firewire is Dead
So this morning I fired up the Prestige and tried the firewire input and plugged in a cable and it did not work, however, I accidently bumped the cable before unplugging and it came on! So I believe it must be a "pin issue" and I will have to look at it internally to see if it can be corrected. (this is the front dv port) so it will be easier to examine, and ideas are very welcome, and THANKS to all the responses.
thanks for this earlier response...
Re: Firewire is Dead
by MichaelD » Fri May 04, 2012 4:53 am
Also check the DV sockets very carefully - all four pins must look the same and be at the same distance from the front of the socket.
"If" a pin has been pushed in it may be touching somewhere behind the socket. This can cause both sockets not to work.
MichaelD
Posts: 325
Joined: Wed Apr 02, 2008 10:05 am
Location: London, England.
Casablanca Unit: Prestige SE v9.1, S4000 Pro Bogart v4.1a, Arabesk v5.0a, Canon HF100
thanks for this earlier response...
Re: Firewire is Dead
by MichaelD » Fri May 04, 2012 4:53 am
Also check the DV sockets very carefully - all four pins must look the same and be at the same distance from the front of the socket.
"If" a pin has been pushed in it may be touching somewhere behind the socket. This can cause both sockets not to work.
MichaelD
Posts: 325
Joined: Wed Apr 02, 2008 10:05 am
Location: London, England.
Casablanca Unit: Prestige SE v9.1, S4000 Pro Bogart v4.1a, Arabesk v5.0a, Canon HF100
Who is online
Users browsing this forum: No registered users and 4 guests