output to tape problem
-
foreveryoung
- Posts: 33
- Joined: Fri Oct 17, 2008 12:45 pm
- Casablanca Unit: Prestige O/S 4.1d
- Contact:
output to tape problem
I have a new S6000 and want to output a 4:3 project into my sony vx2100 camera to miniDV and it will not work. I did this all the time with no issues with my Prestidge. any ideas why?
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: output to tape problem
It is an SD (not HDV) Project?
If the Create button in the Finish screen is active you have to select it and let it render the Project prior to it allowing you to export the Project.
You have the VX2100 in Tape deck mode with a tape set in the write mode (write protect tab not closed), correct?
If the Create button in the Finish screen is active you have to select it and let it render the Project prior to it allowing you to export the Project.
You have the VX2100 in Tape deck mode with a tape set in the write mode (write protect tab not closed), correct?
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
foreveryoung
- Posts: 33
- Joined: Fri Oct 17, 2008 12:45 pm
- Casablanca Unit: Prestige O/S 4.1d
- Contact:
Re: output to tape problem
yes SD project and is rendered and tab is not closed
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: output to tape problem
You are using firewire?
If so, do you have the analog (composite) cable connected?
While the analog cable can be connected when inputting from the VX2100 to the Bogart unit (analog to digital pass through), I believe I remember the VX won't allow firewire input TO the VX with the analog composite cable plugged in.
Other than that, sometimes there were communication handshake issues which turning the units off and then on again can sometimes fix.
If so, do you have the analog (composite) cable connected?
While the analog cable can be connected when inputting from the VX2100 to the Bogart unit (analog to digital pass through), I believe I remember the VX won't allow firewire input TO the VX with the analog composite cable plugged in.
Other than that, sometimes there were communication handshake issues which turning the units off and then on again can sometimes fix.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
foreveryoung
- Posts: 33
- Joined: Fri Oct 17, 2008 12:45 pm
- Casablanca Unit: Prestige O/S 4.1d
- Contact:
Re: output to tape problem
only firewire is connectied and I tried shutting everthing on and off. still no luck
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: output to tape problem
Have you verified the firewire input works on the VX2100 with anything else like another camcorder to eliminate the possibility that it is the VX and not the S6000?
Otherwise, I am out of ideas currently.
Otherwise, I am out of ideas currently.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
LouBruno
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Re: output to tape problem
On the VX2000/2100/PD 150/170 the firewire has to be disconnected from the firewire port when output menu adjustments are executed.
First....disconnect the firewire AFTER power-down the camera. ALWAYS power-down the camera when connecting or disconnecting a firewire attached to an editing system.
POWER-UP-minus the firewire being connected.
Go to the menu and make your video output changes and power-down the camera.
Re-Connect the firewire and power-up again while CONNECTED to your system
See if the firewire is recognized now.
SONY cameras do not like to have menu adjustments while the firewire is attached. Hopefully that is your issue.
First....disconnect the firewire AFTER power-down the camera. ALWAYS power-down the camera when connecting or disconnecting a firewire attached to an editing system.
POWER-UP-minus the firewire being connected.
Go to the menu and make your video output changes and power-down the camera.
Re-Connect the firewire and power-up again while CONNECTED to your system
See if the firewire is recognized now.
SONY cameras do not like to have menu adjustments while the firewire is attached. Hopefully that is your issue.
Who is online
Users browsing this forum: No registered users and 8 guests