Overmodulated Audio

For all questions & tips related to Casablanca video editors.
Ilanchu
Posts: 28
Joined: Sat Jan 10, 2009 3:34 pm
Casablanca Unit: Prestige SE 9.1 Arabesk 4.1
Location: Simi Valley, California
Contact:

Overmodulated Audio

Post by Ilanchu »

In a recent video interview the audio seem to have been overmodulated. When I transfered the clip to my Prestige (SE 9.1) the audio is almost incomprehensible. Is there anything I can do during or after the transfer to correct/improve the quality of the audio? Your help will be greatly appreciated.
methuenbill
Posts: 323
Joined: Wed Apr 02, 2008 4:08 am
Casablanca Unit: Casablanca Studio Pro (unable to use with latest software) The old reliable S6000 still working and using till Studio Pro works. Avio DVD, IMac, Panasonic AG-AC30, 3 Panasonic AG-UG90 last Bogart software and Arabesk release
Location: Methuen, MA
Contact:

Re: Overmodulated Audio

Post by methuenbill »

I have noticed the same with the new Bogart software. I load all files with the audio reduced to -10 and it seems to work.
Ilanchu
Posts: 28
Joined: Sat Jan 10, 2009 3:34 pm
Casablanca Unit: Prestige SE 9.1 Arabesk 4.1
Location: Simi Valley, California
Contact:

Re: Overmodulated Audio

Post by Ilanchu »

Thank you. I'll try it.
CKNewman
Posts: 604
Joined: Tue Mar 25, 2008 2:56 am
Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
Location: Boston, MA
Contact:

Re: Overmodulated Audio

Post by CKNewman »

Was the original audio recorded at too high a level - Is the audio over-modulated when you play it back in the camera itself?

In both my Avio and Kron+ (Generation II editors like the Prestige) I load footage via firewire at -5 db. This usually keeps the audio mostly in the blue with just an occasional little bit going into the yellow. I believe the audio level gets raised somewhere when you export the footage so it keeps things in the "safe" zone.
Craig Newman
Ilanchu
Posts: 28
Joined: Sat Jan 10, 2009 3:34 pm
Casablanca Unit: Prestige SE 9.1 Arabesk 4.1
Location: Simi Valley, California
Contact:

Re: Overmodulated Audio

Post by Ilanchu »

Yes, it was recordrd with the volume on the camera set too high and it's overmadulated when I play it back on the camera too. I am bringing it in via fire wire. I am wandering if there is anything else I can do to correct it, similiar to the programs we have to correct bad video? Than You, Ilan
CKNewman
Posts: 604
Joined: Tue Mar 25, 2008 2:56 am
Casablanca Unit: Windows computer with Bogart SE 13.3, Arabesk 7, Audio Effects Pack v1.2b, Motion 3D XL-1 Pack 1, Sentry HD-Backup, Disk Juggler, Power Key, Aspector, Chromit, Effects Pack 8, Effect Pack 9, PiP Studio 3, Time-X, Ultimate Spice Box HD, Slivers, PIP Studio 4 ; Older windows computer with Bogart 8.4, Arabesk 7; Kron Plus with SE 8.3, most Generation 2 software except for CB Paint, Columbus, titling add-ons, and graphics symbols. Various TVs and a Kenner Give-A-Show Projector
Location: Boston, MA
Contact:

Re: Overmodulated Audio

Post by CKNewman »

There are some programs available on the PC platform and the Mac may have some tools that deal with over-modulation in Final Cut Pro, but if you don't already own them you'd have to go out and buy them and then learn to use them. I have no idea on what the learning curve would be. And of course we don't know if it can be fixed. If you know or can find someone that works in audio forensics, you might ask them if they can help you. You can do an internet search on Fix audio over-modulation. I would not expect too much.
Craig Newman
Ilanchu
Posts: 28
Joined: Sat Jan 10, 2009 3:34 pm
Casablanca Unit: Prestige SE 9.1 Arabesk 4.1
Location: Simi Valley, California
Contact:

Re: Overmodulated Audio

Post by Ilanchu »

Thank you Craig. I was hoping for a solution within my system just like fixing a bad video clip, I guess audio is more complicated then brightening or sharpening a video scene. I appreciate your thoughts. Ilan
BobFoster
Posts: 460
Joined: Tue Apr 01, 2008 9:24 am
Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras
Contact:

Re: Overmodulated Audio

Post by BobFoster »

Over modulated audio is similar to over exposed video. Not much can be done with it. Underexposed video can be brightened and low levels of audio can be boosted. there are a number of free audio processing software on the internet but don't expect much improvement.
Ilanchu
Posts: 28
Joined: Sat Jan 10, 2009 3:34 pm
Casablanca Unit: Prestige SE 9.1 Arabesk 4.1
Location: Simi Valley, California
Contact:

Re: Overmodulated Audio

Post by Ilanchu »

Thank you Bob. :(
methuenbill
Posts: 323
Joined: Wed Apr 02, 2008 4:08 am
Casablanca Unit: Casablanca Studio Pro (unable to use with latest software) The old reliable S6000 still working and using till Studio Pro works. Avio DVD, IMac, Panasonic AG-AC30, 3 Panasonic AG-UG90 last Bogart software and Arabesk release
Location: Methuen, MA
Contact:

Re: Overmodulated Audio

Post by methuenbill »

Something is wrong with the new Bogart software. Music that I have used for wedding background comes in over modulated. I tried a music cd from the store and that is also overmodulated. I am able to lower the sound bar to -10 to get some of the music to play right.
Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests