Has anyone got a Panasonic AG AC8 ?
A Topaz user (with Bogart v6) has recoded some footage and it imports just fine in AVCHD via a card reader or directly with USB from the camera - so far so good!
However connecting the Panasonic to the Topaz doesn’t record any audio from the camera when using the A/V connections (yellow/red/white leads from mini jack) but does record the video, via the yellow.
So, he plugged the AV lead from the camera into the TV directly and it plays both video and audio fine.
Connected a CD player to the Topaz and audio is recorded fine too.
Plugged the Panasonic (via AV) into an old VCR and then plugged that into the Topaz (via AV) and that all works.
Does anyone have any idea as to why the AV out from the Panasonic AG AC8 won’t record audio (it does record picture) into the Topaz via RCA because it has got me stumped
Panasonic AG AC8 - A/V audio
-
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
-
- Posts: 409
- Joined: Sun Apr 13, 2008 10:21 am
- Casablanca Unit: KARAT Bogart 7.1
1-Monitor Mode
Almost all software
Arabesk 6.3f / Ext-HD /Ext-HD-Dock
Sony Cam XR520 - Location: Berlin/Germany
- Contact:
Re: Panasonic AG AC8 - A/V audio
Hi Michael,
please advise to check how the audio mode is set in CAM.
I think it should be set to 2ch(2channel stereo) and not 5.1ch.
Would be nice to hear from you if it helped solving this problem.
I read your posting in German-Support-Forum.
Just curious to know why would someone try analog recording when
the digital recording works fine
please advise to check how the audio mode is set in CAM.
I think it should be set to 2ch(2channel stereo) and not 5.1ch.
Would be nice to hear from you if it helped solving this problem.
I read your posting in German-Support-Forum.
Just curious to know why would someone try analog recording when
the digital recording works fine
Hans-Joachim König
Berlin / Germany
Berlin / Germany
-
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: Panasonic AG AC8 - A/V audio
Thanks Hans - will give it a go.
Would that affect analogue audio out but not the 'digital' then ?
The AVCHD clip that he filmed was long and split on the card.
First section recorded in ok but the second 'lost' its audio.
So we were trying to get the audio in another way (to match it up) and couldn't understand a) how it plays on the TV just fine and B) why putting it through an old VCR could possibly make any difference and C) why the audio record works ok with everything else but not the AG AC8 on the Topaz
Would that affect analogue audio out but not the 'digital' then ?
The AVCHD clip that he filmed was long and split on the card.
First section recorded in ok but the second 'lost' its audio.
So we were trying to get the audio in another way (to match it up) and couldn't understand a) how it plays on the TV just fine and B) why putting it through an old VCR could possibly make any difference and C) why the audio record works ok with everything else but not the AG AC8 on the Topaz
-
- Posts: 409
- Joined: Sun Apr 13, 2008 10:21 am
- Casablanca Unit: KARAT Bogart 7.1
1-Monitor Mode
Almost all software
Arabesk 6.3f / Ext-HD /Ext-HD-Dock
Sony Cam XR520 - Location: Berlin/Germany
- Contact:
Re: Panasonic AG AC8 - A/V audio
Hi Michael,
my tip was just a try.
Also for me a mystery why the analogue audio from Cam isn't accepted by Topas RCA-Inputs.
my tip was just a try.
Also for me a mystery why the analogue audio from Cam isn't accepted by Topas RCA-Inputs.
Hans-Joachim König
Berlin / Germany
Berlin / Germany
-
- Posts: 460
- Joined: Tue Apr 01, 2008 9:24 am
- Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras - Contact:
Re: Panasonic AG AC8 - A/V audio
To point out the obvious, you do have the audio input set to: "rear RCA" right?
-
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Re: Panasonic AG AC8 - A/V audio
Bingo
BobFoster wrote:To point out the obvious, you do have the audio input set to: "rear RCA" right?
-
- Posts: 409
- Joined: Sun Apr 13, 2008 10:21 am
- Casablanca Unit: KARAT Bogart 7.1
1-Monitor Mode
Almost all software
Arabesk 6.3f / Ext-HD /Ext-HD-Dock
Sony Cam XR520 - Location: Berlin/Germany
- Contact:
Re: Panasonic AG AC8 - A/V audio
I also go with posts of Bob and Lou.
Main Bogart Screen => Audio-Recording/Edit => Input : <RCA back>
Main Bogart Screen => Audio-Recording/Edit => Input : <RCA back>
Hans-Joachim König
Berlin / Germany
Berlin / Germany
-
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: Panasonic AG AC8 - A/V audio
Yep - that was set correctly as when the Panasonic was connected 'through' an old VCR it all worked as expected.
It is all most odd - I can't imagine what changes (in this set up) by passing the signal through another device, the VCR.
It is all most odd - I can't imagine what changes (in this set up) by passing the signal through another device, the VCR.
Haven't been able to check this out yet, hopefully later today - maybe "this" is the answerI think it should be set to 2ch(2channel stereo) and not 5.1ch.
Who is online
Users browsing this forum: No registered users and 15 guests