Failed to load
-
- Posts: 3
- Joined: Tue May 26, 2015 7:50 pm
- Casablanca Unit: Prestige
- Contact:
Failed to load
Will someone please tell me the implication of the error message, "Failed to load the project Files!" I have used a Prestige editor for a number of years and have been happy with it until I just recently got this error message. After setting up a video project and then turning off the machine, I get this message and my project has disappeared.
-
- Posts: 409
- Joined: Sun Apr 13, 2008 10:21 am
- Casablanca Unit: KARAT Bogart 7.1
1-Monitor Mode
Almost all software
Arabesk 6.3f / Ext-HD /Ext-HD-Dock
Sony Cam XR520 - Location: Berlin/Germany
- Contact:
Re: Failed to load
Hi babycodv2,
I'm not sure
But maybe it has to do your prestige won't save anymore correctly because
the saving battery is empty.
This cell will normally hold capacity for aprox. 5 years.
I'm not sure
But maybe it has to do your prestige won't save anymore correctly because
the saving battery is empty.
This cell will normally hold capacity for aprox. 5 years.
Hans-Joachim König
Berlin / Germany
Berlin / Germany
-
- Posts: 323
- Joined: Wed Apr 02, 2008 4:08 am
- Casablanca Unit: Casablanca Studio Pro (unable to use with latest software) The old reliable S6000 still working and using till Studio Pro works. Avio DVD, IMac, Panasonic AG-AC30, 3 Panasonic AG-UG90 last Bogart software and Arabesk release
- Location: Methuen, MA
- Contact:
Re: Failed to load
Why would they put a battery in the unit? I hope it is removable. I had a similar problem with some battery that was soldered to the PCB on the 4000. I ended up buying the 6000.
-
- Posts: 3
- Joined: Tue May 26, 2015 7:50 pm
- Casablanca Unit: Prestige
- Contact:
Re: Failed to load
It appears that project information is in the system, because I get the message that memory is 94% full, whereas it was much lower at the beginning of the project (30%). However, there seems to be no communication between what is apparently on the hard drive and what can be accessed by the system.
-
- Posts: 3
- Joined: Tue May 26, 2015 7:50 pm
- Casablanca Unit: Prestige
- Contact:
Re: Failed to load
After checking with Tech Support, it appears that my problem is a "loop" which will require reloading the O.S. In my case, this will amount to a system upgrade.
-
- Posts: 6446
- Joined: Mon Mar 24, 2008 5:49 pm
- Casablanca Unit: STUDIO ULTRA ,SAPHIR, MS TRAVEL ..with ALL SOFTWARE, Cassie Travel Laptop PRO- Bogart Windows, MSI APACHE laptop with BOGART and all Current BOGART & Arabesk. Saphir 2.
GLIDECAM HD-2000, I-Pad latest, Sony HX-99..4K still camera
SONY FDR-53 4K,
, SONY FDR AX-700 HDR 4K video camera, GoPro HD2&3, SONY HDR-CX150 small HD pocket camera, SONY AX-53. Panasonic HC-20
Two Samsung BD D5700 Blu-ray players. OPPO 4K player.
JVC DT-V20L1 HDV monitor, All Music2Hues and Digital Hotcakes, Nikon D-80 still camera, NIKON D7100 HDSLR 18-300mm lens, D500 Nikon, 10 professional bicycles, two camels and a donkey :-) ........ Gocycle@gmail.com - Location: Lancaster, PA
- Contact:
Who is online
Users browsing this forum: No registered users and 31 guests