S2000 Shuts down during video record

[MikeMattke]

I have tried feeding in video via the Front and Rear RCA inputs. During Record the unit powers down.

[mhuebmer]

• Does this happen directly after hitting the record button
• Is there one of those current versions in use: Bogart 5.26 / 6.22 / 7.20 / 8.17 / 9.12/ 10.6 / 11.3 or some outdated
• Project is set to SD 4:3 with interlace "on"

Recording may break when there is empty space on the tape or when there are tape errors. Small ones should be caught, big ones may produce problems.
I would recommend to use the MediaManager / Film-Archiv / Opt to record analog footage.

[MikeMattke]

No. It happens while recording is going on. Now the unit won't power up. Guessing power supply. Worked fine for a large project I finished. Just started acting up recently.

[mhuebmer]

If the "beep" is missing upon startup, use the rear power switch at the power supply to shut off the S2000. Then unplug the power-cord and wait 3(!) hours. Plug in the power-cord and afterwards switch on the power on the rear.

If this should not help... describe more detailed what the system does: beep yes/no (1x or multiple) Display and/or TV showing (what) text Any USB devices attached.. unplug all but Trackball

[MikeMattke]

Taking my unit in tomorrow to have power supply looked at. Suggestions for a replacement? If the Hard drive need replacing, any suggestions for brand, model of a 1-Terabyte?

[mhuebmer]

Power supply: Be quiet BN090 or compatible.... IF the power supply is causing the trouble.

...describe more detailed what the system does: beep yes/no (1x or multiple) Display and/or TV showing (what) text Any USB devices attached.. unplug all but Trackball