Project Transfer to New Unit

For all questions & tips related to Casablanca video editors.
Post Reply
rone
Posts: 110
Joined: Sat May 03, 2008 11:19 am
Casablanca Unit: Solitaire Plus, all software, GL2 and GY HM 700
Location: Fairview Heights, Illinois U.S.A
Contact:

Project Transfer to New Unit

Post by rone »

Can I take a hard drive loaded with projects, created on my Avio w/version 4.1d or greater, and place the hard drive into a Solitare sled and the Solitare read and open the project folders? :?
videojim
Posts: 607
Joined: Tue Aug 12, 2008 3:22 pm
Casablanca Unit: Casablanca S6000, with 4.1G Bogart.
Location: Memphis TN
Contact:

Re: Project Transfer to New Unit

Post by videojim »

Good question for Chuck, Chick, ole thingamajig. He's the expert. Ask him.
Skype ID-talkingrock756
BobFoster
Posts: 460
Joined: Tue Apr 01, 2008 9:24 am
Casablanca Unit: Foster, Georgia video Productions, Inc
Bishop, GA Karat X2, Bogart 5.6
Most all software, 2X Sony HVR-NX3 Sony HVR-A1U, Sony PD-170/150, Sony HVR Z5U, 3 - Canopus ADVC500 converter, 2 x HXR-NX3 Sony Cameras
Contact:

Re: Project Transfer to New Unit

Post by BobFoster »

I switch hard drives between Prestige, Prestige Plus and Renomee Plus. They all have to be running the same version of OS software and any aftermarket software that is used in the project also has to be licensed for both machines. Hope this helps.
rone
Posts: 110
Joined: Sat May 03, 2008 11:19 am
Casablanca Unit: Solitaire Plus, all software, GL2 and GY HM 700
Location: Fairview Heights, Illinois U.S.A
Contact:

Re: Project Transfer to New Unit

Post by rone »

How about firewire the project out of the Cassie #1 thru the finish, record to VCR, to play storyboard and in Cassie #2 record the firewire signal?
CasablancaExpert
Posts: 841
Joined: Fri Jan 16, 2009 9:34 am
Casablanca Unit: S3000, S4000 PRO, Renommee Plus
Contact:

Re: Project Transfer to New Unit

Post by CasablancaExpert »

As Bob pointed out - you can swap Hard Drives between the Prestige, Renommee and Solitaire units (as long as the same OS version is active on all those units). I remember something about an issue doing it between an AVIO and a Solitaire but I cannot find anything solid in my notes. You could always try it and the worst that should happen is -- nothing ;).

Your other option is certainly do-able -- you can export the storyboard out of your AVIO to DV tape and then back in to the Solitaire. You should also try going direct between units though that can be tricky and does not work on some versions of the OS.

Regards,
Chet
Chet Davis
the Casablanca Expert
chet@chetdavis.com
http://www.CasablancaExpert.com
TimKennelly
Posts: 1806
Joined: Mon Mar 24, 2008 6:40 pm
Casablanca Unit: No Casablanca unit currently.
Location: Clio, MI 48420
Contact:

Re: Project Transfer to New Unit

Post by TimKennelly »

There was an audio problem putting a drive edited on an Avio into a Solitaire where it affected the playback speed of the audio.

There is no reason to add the "out to tape" method you mentioned as you can firewire directly between the Avio and Solitaire with the SE4 you mention you have.

Just make sure to turn one of the units all the way off before connecting or disconnecting a firewire cable (true for either of those machines with any other firewire connection as well) or you could fry the DV firewire board in the units which is the single most expensive listed repair.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.


Tim Kennelly
Martyn
Posts: 152
Joined: Tue Mar 25, 2008 7:38 am
Casablanca Unit: You name it
Location: UK
Contact:

Re: Project Transfer to New Unit

Post by Martyn »

I believe the Audio problem Tim refers to is the sound sampling being different on the Avio to its bigger brothers. Swapping the drive would play the video ok but the audio might sound like Alvin from the Chipmonks (of course I don't rememmber him but I heard recordings) :lol:

Martyn
Dalco uk
MartinWilson
Posts: 38
Joined: Thu Apr 10, 2008 3:18 pm
Casablanca Unit: Solitaire / Prestige / Avio DV x 2 v4 / Basic Avio x 2 v1
Contact:

Re: Project Transfer to New Unit

Post by MartinWilson »

I regularly send projects from one Avio to another direct by firewire and not had a problem yet.
Martin

GTFC Video

Goole, East Yorkshire, England
TimKennelly
Posts: 1806
Joined: Mon Mar 24, 2008 6:40 pm
Casablanca Unit: No Casablanca unit currently.
Location: Clio, MI 48420
Contact:

Re: Project Transfer to New Unit

Post by TimKennelly »

You can send firewire between an Avio and a Solitaire as well as I use to do that often, but that is not what we are referring to.

The problem comes if you try to physically place a hard drive with Projects created on an Avio into a Solitaire sled and trying to use or edit from there.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.


Tim Kennelly
rone
Posts: 110
Joined: Sat May 03, 2008 11:19 am
Casablanca Unit: Solitaire Plus, all software, GL2 and GY HM 700
Location: Fairview Heights, Illinois U.S.A
Contact:

Re: Project Transfer to New Unit

Post by rone »

It worked !

Transferered via firwire between Avio and Solitaire all projects .... sweet! :)
Post Reply

Who is online

Users browsing this forum: No registered users and 58 guests