Full Desructive Install of BogartSE 2.3d

[HansJoachimKoenig]

Did a full destructive installation of 2.3d today.
Setting 2 monitor mode with no complications.
After powering up the cardreader via Foto-Transfer is not recognized.
Dis- and Reconnecting succeeds importing Photos from card.

[swisscasauser]

Hi,

Did a full destructive install of BogartSE 2.3e...but unfortunately...the 2 monitors mode (VGA/DVI) still doesn't work !!!!

[HansJoachimKoenig]

In your profile I see your machine is a Solitaire(BogartSE).
Maybe the difference has to do with type of machines?
I have a S4000Pro and did a full destructive installation of 1.6e/2.3e today and 2 monitor mode is OK.
I think you know that after a full new installation you will only see something on TV monitor in S-Video mode?
Or maybe not on a Solitaire?
From here I do my setting for 2 monitor mode, VGA & DVI/HDMI
Maybe another user having a Solitaire (BogartSE) can help you?

[swisscasauser]

Hi,

Thanks for your answer.

Unfortunately I don't think it is a matter of hardware, my Solitaire has now the same mainboard as the one on the S4000 pro.
Maybe it's the VGA monitor I use (an old Dell Crt)...I'll check with an other one...

Ooops...I checked..in fact...this old Dell is not supported by my Cassie...

I tested with a new one...it works ok now...

[HansJoachimKoenig]

Hi Vincent,
when I did an update to 2.3e at the end there was a note saying "Installation abgebrochen" but in system setting I have Version 2.3e
System works OK.
Then I did a full istallation of 2.3e and again at the end same note, despite system shows Version 2.3e and is working OK.
Have you also seen this note after installation was finished?
Another question: Did you choose "English" or "Deutsch" for your installation?
Maybe this could be the difference?