happened,no image,no time code, no nothing. My player is the
new GV-HD700 HDV Video Walkman,by firewire connection
What am I doing wrong? ??
HD CAPTURE HOW?
-
Franklinbencosme
- Posts: 433
- Joined: Wed Jan 21, 2009 10:13 am
- Casablanca Unit: B4 WINDOWS main edit system S-6000 as BACKUP and old tapes edit
- Location: Dominican Republic
- Contact:
HD CAPTURE HOW?
Hello !!! today I tried to capture HD on my s-pro and nothing
happened,no image,no time code, no nothing. My player is the
new GV-HD700 HDV Video Walkman,by firewire connection
What am I doing wrong? ??
happened,no image,no time code, no nothing. My player is the
new GV-HD700 HDV Video Walkman,by firewire connection
What am I doing wrong? ??
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: HD CAPTURE HOW?
Franklin,
Starting at the most basic, you have designated the Project setting to be HDV?
Does the GV-HD700 HDV Video Walkman have settings to downconvert on the fly from HDV to SD?
If so, make sure that setting is not activated as an HDV Project will not recognize SD or HDV downconverted SD footage.
When you say it doesn't do anything, are the S4P onscreen transport controls controlling the deck?
You choose Play on the onscreen controls and the deck begins playback?
If so, I have found the S4P fairly reliably fails to recognize the connection between the deck and itself upon the first power up or even a tape change.
Begin Playback using the onscreen controls, then Stop the deck transport with the onscreen controls and then choose Play again with the onscreen controls.
My experience at that point is a see a progress bar for about a frame's worth duration flicker on the monitor and then I can activate Record on the S4P and the time code begins to roll.
Video monitoring takes another couple of seconds to begin and is a series of delayed stills.
The actually footage IS being recorded (even though the video and audio on the monitor is crappy) so let it roll at that point until you have captured all the footage you intended to.
Starting at the most basic, you have designated the Project setting to be HDV?
Does the GV-HD700 HDV Video Walkman have settings to downconvert on the fly from HDV to SD?
If so, make sure that setting is not activated as an HDV Project will not recognize SD or HDV downconverted SD footage.
When you say it doesn't do anything, are the S4P onscreen transport controls controlling the deck?
You choose Play on the onscreen controls and the deck begins playback?
If so, I have found the S4P fairly reliably fails to recognize the connection between the deck and itself upon the first power up or even a tape change.
Begin Playback using the onscreen controls, then Stop the deck transport with the onscreen controls and then choose Play again with the onscreen controls.
My experience at that point is a see a progress bar for about a frame's worth duration flicker on the monitor and then I can activate Record on the S4P and the time code begins to roll.
Video monitoring takes another couple of seconds to begin and is a series of delayed stills.
The actually footage IS being recorded (even though the video and audio on the monitor is crappy) so let it roll at that point until you have captured all the footage you intended to.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
Franklinbencosme
- Posts: 433
- Joined: Wed Jan 21, 2009 10:13 am
- Casablanca Unit: B4 WINDOWS main edit system S-6000 as BACKUP and old tapes edit
- Location: Dominican Republic
- Contact:
Re: HD CAPTURE HOW?
Hey tim yes the s-pro control the player!! let me go to the deck
menu to see how desactive de I-LINK ?,let me traied tomorrow!!
at my studio since I am at home at this time
menu to see how desactive de I-LINK ?,let me traied tomorrow!!
at my studio since I am at home at this time
-
TimKennelly
- Posts: 1806
- Joined: Mon Mar 24, 2008 6:40 pm
- Casablanca Unit: No Casablanca unit currently.
- Location: Clio, MI 48420
- Contact:
Re: HD CAPTURE HOW?
Correct, if the I-Link works on the deck as it does on the cams there will be an internal menu setting that will say something like HDV->DV on or off.
For HDV input you would want it set to off and also you have to power cycle (turn the deck off and then back on again) after making the change to actually make the change happen.
For HDV input you would want it set to off and also you have to power cycle (turn the deck off and then back on again) after making the change to actually make the change happen.
My mom always told me that happiness was the key to life.
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
At school they asked me what I wanted to be when I grew up.
I said “happy" and they told me I didn’t understand the question.
I told them they didn’t understand life.
Tim Kennelly
-
Franklinbencosme
- Posts: 433
- Joined: Wed Jan 21, 2009 10:13 am
- Casablanca Unit: B4 WINDOWS main edit system S-6000 as BACKUP and old tapes edit
- Location: Dominican Republic
- Contact:
Re: HD CAPTURE HOW?
Hey !! 
HD capture is working 
,my next step is get a nice
tv(26 inch) with HDMI to see tha quality from HD footage.
Any recommendation to a nice tv-monitor
Thanks Franklin!!!
ps MGT A FEW DAYS TO LEARN AND HAVE FUN
HD capture is working ,my next step is get a nicetv(26 inch) with HDMI to see tha quality from HD footage.
Any recommendation to a nice tv-monitor
Thanks Franklin!!!
ps MGT A FEW DAYS TO LEARN AND HAVE FUN
Who is online
Users browsing this forum: No registered users and 32 guests