I put 2 scenes in the storyboard, and went to the transition menu, picked out PIP Studio2, and the mouse froze! Had to reset the machine, shut it down, re-start, and all was fine. happen to anybody else?
Also, is anybody doing the Eye Candy series ending up with the scenes used in PIP Studio 2 having a black border on either side? They don't show up that way in the training video, of course, but they do in my S6000, with the project settings at 720 x 640, like he specified.
is this happening to anybody else?
-
- Posts: 607
- Joined: Tue Aug 12, 2008 3:22 pm
- Casablanca Unit: Casablanca S6000, with 4.1G Bogart.
- Location: Memphis TN
- Contact:
is this happening to anybody else?
Skype ID-talkingrock756
-
- Posts: 318
- Joined: Wed Mar 26, 2008 4:45 am
- Casablanca Unit: Studio Pro OS B4W V9
S6000 OS Bogart SE V9
Solitaire OS V9.1
Programs:- Most of the standard operating programs. - Location: Kingston upon Hull England
- Contact:
Re: is this happening to anybody else?
Jim
Two or three weeks back, I was having similar problems, which sometimes came as an arrow freeze, but more often the screen would go black. In all cases I had to press the reset button on my S6K. On one occasion I lost a whole days work, since it stated it was having to restore to an earlier backup.
I had in the past just done updates and in some cases had more than one version of a program installed. e.g. two versions of Arabesk
After performing an HDD backup, I did a complete new installation of the Operating system, reloaded just the latest programs and did a backup reinstall.
Touch wood I have not had any crashes since.
Our tech contact in the UK, Michael D, suggests a full installation rather than updates, since bits of the old program can remain and cause problems.
Ian
Two or three weeks back, I was having similar problems, which sometimes came as an arrow freeze, but more often the screen would go black. In all cases I had to press the reset button on my S6K. On one occasion I lost a whole days work, since it stated it was having to restore to an earlier backup.
I had in the past just done updates and in some cases had more than one version of a program installed. e.g. two versions of Arabesk
After performing an HDD backup, I did a complete new installation of the Operating system, reloaded just the latest programs and did a backup reinstall.
Touch wood I have not had any crashes since.
Our tech contact in the UK, Michael D, suggests a full installation rather than updates, since bits of the old program can remain and cause problems.
Ian
Ian Pearson S6000 Bogart SE7 - Solitaire OS V9.1 - Avio DV Pro OS V9.1
Programs:- Most programs, with the notable exception of CB Paint and Quadcam
Kingston upon Hull. England
Programs:- Most programs, with the notable exception of CB Paint and Quadcam
Kingston upon Hull. England
-
- Posts: 607
- Joined: Tue Aug 12, 2008 3:22 pm
- Casablanca Unit: Casablanca S6000, with 4.1G Bogart.
- Location: Memphis TN
- Contact:
Re: is this happening to anybody else?
Ian,
OK, may have to do that. Will have to ask Ken how this is done, as I understand the program codes need to be saved. Thanks for the help. Begins to make regret the investment, but I have to wonder if folks using other editing systems don't have the same problems, whether their system is one-box or software in a tower PC.
OK, may have to do that. Will have to ask Ken how this is done, as I understand the program codes need to be saved. Thanks for the help. Begins to make regret the investment, but I have to wonder if folks using other editing systems don't have the same problems, whether their system is one-box or software in a tower PC.
Skype ID-talkingrock756
-
- Posts: 841
- Joined: Fri Jan 16, 2009 9:34 am
- Casablanca Unit: S3000, S4000 PRO, Renommee Plus
- Contact:
Re: is this happening to anybody else?
Jim,
I would recommend breaking your post here into two separate posts as there are two separate issues.
Regarding your stated difficulty importing MOV files - do you know what resolution the MOV files were shot at?
If it's 24P or 60P that WILL likely be an issue.
If you're 30P or 60i you should be seeing some degree of success here.
To archive (save) your software activation codes - see this article on my website:
http://cassieexpert.live.subhub.com/articles/20091229
Regards,
Chet
I would recommend breaking your post here into two separate posts as there are two separate issues.
Regarding your stated difficulty importing MOV files - do you know what resolution the MOV files were shot at?
If it's 24P or 60P that WILL likely be an issue.
If you're 30P or 60i you should be seeing some degree of success here.
To archive (save) your software activation codes - see this article on my website:
http://cassieexpert.live.subhub.com/articles/20091229
Regards,
Chet
-
- Posts: 318
- Joined: Wed Mar 26, 2008 4:45 am
- Casablanca Unit: Studio Pro OS B4W V9
S6000 OS Bogart SE V9
Solitaire OS V9.1
Programs:- Most of the standard operating programs. - Location: Kingston upon Hull England
- Contact:
Re: is this happening to anybody else?
Jim
As for your re-install issue, it is quite easy, although it does take a little time to complete.
If you look at this topic I replied to earlier viewtopic.php?f=14&t=3769 I have detailed the back-up and saving licence codes you will need to do a full install. Also if you have archived effects or colours, it also describes how to do this.
When you do a full Install there are a couple of other things that I recommend you do prior to using (recording onto) the machine.
In Project you'll need to change the Image setting to Large or Full - not that important but once done it stays like that.
In Settings, Record Playback you'll need to change the Cut Recognition to Start Code (or it won't auto split properly) and then where it says Display During DV/HDV Recording that needs to be changed from a 'check mark' to a 'minus' sign.
Ian
As for your re-install issue, it is quite easy, although it does take a little time to complete.
If you look at this topic I replied to earlier viewtopic.php?f=14&t=3769 I have detailed the back-up and saving licence codes you will need to do a full install. Also if you have archived effects or colours, it also describes how to do this.
When you do a full Install there are a couple of other things that I recommend you do prior to using (recording onto) the machine.
In Project you'll need to change the Image setting to Large or Full - not that important but once done it stays like that.
In Settings, Record Playback you'll need to change the Cut Recognition to Start Code (or it won't auto split properly) and then where it says Display During DV/HDV Recording that needs to be changed from a 'check mark' to a 'minus' sign.
Ian
Ian Pearson S6000 Bogart SE7 - Solitaire OS V9.1 - Avio DV Pro OS V9.1
Programs:- Most programs, with the notable exception of CB Paint and Quadcam
Kingston upon Hull. England
Programs:- Most programs, with the notable exception of CB Paint and Quadcam
Kingston upon Hull. England
Who is online
Users browsing this forum: No registered users and 38 guests