Avio on off button broken
-
methuenbill
- Posts: 323
- Joined: Wed Apr 02, 2008 4:08 am
- Casablanca Unit: Casablanca Studio Pro (unable to use with latest software) The old reliable S6000 still working and using till Studio Pro works. Avio DVD, IMac, Panasonic AG-AC30, 3 Panasonic AG-UG90 last Bogart software and Arabesk release
- Location: Methuen, MA
- Contact:
Avio on off button broken
Tried to set up my avio after years of no use and the front on off button is broken. Cant seem to see a switch through the hole.
-
sparks0335
- Posts: 48
- Joined: Thu Jan 29, 2009 8:10 pm
- Casablanca Unit: Renommee v9.1 audio effects v1.1a, 3-D shapes v1.1, card drive v1.3d,
disk-transfer v1.2a, DVD arabesk v3.3, effect pack (1-4) v1.1, Front pack (1-4)
PIP studio v1.0, Photo Transfer v1.6c, Power Key v1.0, Title Effects 1 v1.2
Title Effects 2 v1.4, Blue Box World, Object Tracer.
Prestige Plus v4.1 - Location: Burlington, Iowa
- Contact:
-
MichaelD
- Posts: 634
- Joined: Wed Apr 02, 2008 8:05 am
- Casablanca Unit: Saphir B4W v9, S4000 Pro Bogart v9, Arabesk v7, Render Booster, Canon HF100, Prestige SE v9.1.
- Location: London, England.
- Contact:
Re: Avio on off button broken
As it's an Avio DVD it must be one with the on/off in the middle area and so the little micro switch might have become detached.
These can be repaired but possibly more of a pain would be if the silver plastic (outside) button has gone or become detached ?
It's much rarer for that to happen but is not so easy to get a replacement (if at all) as it's part of the front facia.
If the inside switch is still in one piece (or if you have it repaired) you can use a pencil with an eraser on the end to switch it on . . .
These can be repaired but possibly more of a pain would be if the silver plastic (outside) button has gone or become detached ?
It's much rarer for that to happen but is not so easy to get a replacement (if at all) as it's part of the front facia.
If the inside switch is still in one piece (or if you have it repaired) you can use a pencil with an eraser on the end to switch it on . . .
-
methuenbill
- Posts: 323
- Joined: Wed Apr 02, 2008 4:08 am
- Casablanca Unit: Casablanca Studio Pro (unable to use with latest software) The old reliable S6000 still working and using till Studio Pro works. Avio DVD, IMac, Panasonic AG-AC30, 3 Panasonic AG-UG90 last Bogart software and Arabesk release
- Location: Methuen, MA
- Contact:
Re: Avio on off button broken
On button pushed in to far and broke micro switch. Poor way to make an on off button. Brought the PCB into work and wired in a real switch. No I will use the unit to load in vhs tapes ect and make dvds. 
Who is online
Users browsing this forum: No registered users and 44 guests