Error with Claro, Fixed problem

[James]

Paul/Chet: Thanks for help but believe I found the problem. My iLink/DV board popped out at one end of its socket. I reseated it and everything seems to work ok. Oh, and MacroSystems sent me a set of instructions on how to reboot. If anyone needs, let me know.

During my troobleshooting I inadvertenly pulled the purple/white "Reset Switch" cable off its terminal pins. Could someone look at their Claro and tell me correct pin location. Looking from front of Claro down onto the motherboard, I have the connector on center pins, first two at bottom. thanks all , love this place.

[PaulBusta]

Hi James, good to hear you fixed your own problem. Can't help you with that cable though.